Bulk Handgun Bullets

American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads.  These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM.  These bullets are incredibly uniform in weight and diameter and are priced right.  Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.  

Quantity discount as follows:

Prices include shipping 

500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.

2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250

American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads.  They feature a precision drawn copper jacket fully enclosing its base leaving  no exposed lead for a very clean shooting and accurate projectile.  These bullets make a wonderful target, defense, or general blasting bullet.  They are suitable for a defense application as they will expand properly upon contact with soft tissue.  These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM.  

Quantity discount as follows:

Prices include shipping

500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.

2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250

American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads.  These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM.  These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.  

Quantity discount as follows:

Prices include shipping 

500 pieces, 2 units: $100.00, $50.00/250

1000 pieces, 4 units in cart: $192.00, $48.00/250

2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250

2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250

40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 Caliber .401 165 grain flat point plated bullets manufactured in the USA.  These bullets are perfect for 10MM or 40 Smith and wesson loadings.  Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.  We have tried many different brands of plated bullets and these are hands down the best we have seen.

Quantity discount as follows:

Prices include shipping

500 pieces, 2 units: $72.00, $36.00/250

1000 pieces, 4 units: $136.00, $34.00/250

2500 pieces, 10 units: $320.00, $128.00 per K,  $32.00/250

40 Caliber .401 180 grain plated bullets manufactured in the USA.  These bullets are perfect for 10MM or 40 Smith and wesson loadings.  Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.  We have tried many different brands of plated bullets and these are hands down the best we have seen.

Quantity discount as follows:

Prices include shipping

500 pieces, 2 units: $78.00, $39.00/250

1000 pieces, 4 units: $148.00, $37.00/250

2500 pieces, 10 units: $350.00, $140.00 per K,  $35.00/250

40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue.  There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.

Prices include shipping

3 units in cart, 300 pieces: $31.00 per 100

5 units in cart, 500 pieces: $29.00 per 100