Search results for: 'Bullet puller'A=0'
- Related search terms
- bullets for reloading 40'and(select*from(select sleep(0))a/**/union/**/select 1)='
- bullets for reloading 40'and(select'1'from/**/cast(md5(1346155472)as/**/int))>'0
- bullets for reloading 40"and"o"="o
- Bullets for reloading 40'and(select*from(select sleep(7))a/**/union/**/select 1)=',nereloading.com/catalogsearch/result?q,nerelo
- bullets for reloading 40'and/**/convert(int,sys.fn_sqlvarbasetostr(hashbytes('md5','1331748766')))>'0'
-
Hornady 6MM .243 100 Grain Boat Tail Spire Point Interlock(100 ct.)$39.99 As low as $30.00
6mm .243 diamter 100 grain boat tail spire point interlock projectiles manufactured by Hornady. These projectiles make a wonderful hunting bullet in any load that calls for a 6MM .243 bullet. Most customers are running these in .243 Winchester but they will work well in 6MM Remington or even 240 Weatherby. The interlock design utilizes an interlock ring that ensures the lead core and copper jacket remain together for deep penetration and weight retention to deliver a massive cavitational wound.
Volume Discounts As Follows:
Prices include shipping!
300 count, 3 units in cart: $34.00 per 100
500 count, 5 units in cart: $32.00 per 100
1000 count, 10 units in cart: $30.00 per 100
Learn More -
Hornady XTP 10MM/40 S&W .400 155 Grain Jacketed Hollow Point(100 ct.)$38.99 As low as $29.00
40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue. There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.
Prices include shipping
3 units in cart, 300 pieces: $31.00 per 100
5 units in cart, 500 pieces: $29.00 per 100
Learn More -
Lee Precision 45 ACP Carbide Factory Taper Crimp Die 90864$27.99
Carbide, single crimp die.
Learn More -
Lee Precision 9MM Carbide Factory Taper Crimp Die 90860$27.99
Carbide, single crimp die.
Learn More -
Hornady 45 Colt .451 250 Grain XTP Jacketed Hollow Point 45200(100 ct.)$42.99 As low as $38.00
45 Caliber, .452 diameter 250 grain Hornady XTP Jacketed Hollow Points. The Hornady XTP is a premier defense and hunting bullet with a swaged lead core with a jacket divided into 6 symetrical sections. The 6 sections are created by serrations in the jacket to aid controlled expansion at lower pistol velocities for deep controlled penetration. Most defense bullets out there are designed to expand at one factory specified velocity, the XTP will expand over a range of pistol velocities. The cannelure keeps the jacket married to its swaged lead core and makes a good anchor point to crimp the projectile. Overall these are an excellent bullet for 45 Colt chamberings either in a revolver or a rifle. These projectiles will do well in any loading that calls for a .452 diameter projectile!
For quantity discount on 300 pieces just put 3 units or more in your cart and pay just $38.00 per 100 delivered!
-
Hornady 45 Caliber .452 300 Grain XTP Jacketed Hollow Point 45230(100 ct.)$45.99 As low as $40.00
45 caliber .452 diameter 300 grain Hornady XTP Jacketed Hollow Points. The Hornady XTP is a premier defense and hunting bullet with a swaged lead core with a jacket divided into 6 symetrical sections. The 6 sections are created by serrations in the jacket to aid controlled expansion at lower pistol velocities for deep controlled penetration. Most defense bullets out there are designed to expand at one factory specified velocity, the XTP will expand over a range of pistol velocities. The cannelure keeps the jacket married to its swaged lead core and makes a good anchor point to crimp the projectile. Overall these are an excellent bullet for 45 Colt, 454 Casull, or any other cartridge calling for a .452 diameter projectile. These projectiles will do well in either pistols or rifles.
For quantity discount on 300 pieces just put 3 units or more in your cart and pay just $40.00 per 100 delivered!
-
45-70 Government .459 405 Grain Flat Point Lead Cast(100 ct.)$41.99
.459 diameter 405 grain flat point lead cast 45-70 Government bullets. These projectiles feature a beveled base, have been lubed, and are made with a 92/6/2 lead mix giving them a hardness of 16-17 brinell. This lead mix is the most desirable mix and is absolutely necessary for rifle projectiles.
Learn More -
Hornady 55 Grain Soft Point Boat Tail with Cannelure (250 count)$41.99 As low as $27.00
55 Grain Full metal jacket soft point boat tail bullets with a cannelure for loading .223 Remington, 5.56 Nato, or any other cartridge that calls for a .224 diameter projectile. These projectiles feature a precision drawn copper jacket, a serrated cannelure, and an exposed lead tip which aids in fragmentation upon contact. These bullets make a wonderful target, hunting, or defense load without breaking the bank.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
Hornady 30 Caliber .308 168 Grain Hollow Point Boat Tail 30501(100 count)$42.99 As low as $32.00
.308 diameter 168 grain hollow point boat tail with Hornady's new AMP(advanced manufacturing process) bullet jackets. These jackets have zero tolerance for concentricity and near zero wall thickness variation for extreme consistency. These are incredible bullets and are priced right. Compare these to Sierra or Nosler and you will see the difference in price but not quality, Hornady is hands down the best value out there!
Quanitity Discount as Follows:
Prices include shipping!
3 units, 300 pieces: $38.00 per 100
5 units, 500 pieces: $36.00 per 100
10 units, 1000 pieces: $34.00 per 100
25 units, 2500 pieces: $32.00 per 100
-
45 Caliber .452 250 Grain Flat Point(100 ct.)$25.99 As low as $18.00
45 Caliber .452 250 flat point plated bullets manufactured in the USA. These bullets will function well in 45 Long Colt, 454 Casull, or any other cartridge calling for a .452 diameter projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $20.00 per 100
500 pieces, 5 units in cart: $18.00 per 100
-
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
50 Action Express .500 300 Grain Flat Point(100 ct.)$34.99 As low as $26.00
50 action express .500 300 grain flat point plated bullets manufactured in the USA. These bullets were designed to function especially well in 50 Action express but can be used in other loads that call for a 50 caliber .500 projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
Learn More -
Northeast 38 Caliber 125 grain Flat Point(250 count)$44.99 As low as $36.00
38 Caliber 125 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $80.00, $40.00/250
4 units, 1000 pieces: $152.00, $38.00/250
12 Units, 3000 pieces: $432.00, $144.00/k, $36.00/250
-
38 Caliber 125 Grain Jacketed Soft Point(250 count)$56.99 As low as $48.00
Premium American made, .357 diameter 125 grain jacketed soft point projectiles. These bullets are very consistent and feature a precision drawn copper jacket and a lead core with a cannelure. There is no exposed lead on the rear end of these bullets so they make for a very clean burning option for indoor ranges. The soft point cuts very clean holes in paper for target and will also work well in a self defense application. These can be used in 38 special or in the higher pressured 357 magnum, they can withstand magnum pressures with no problem at all. We have a number of customers using these in 357 magnum lever guns at very high velocities with no issues.
Quantity Discount as Follows
500 pieces, 2 units in cart: $108.00, $54.00/250
1000 pieces, 4 units in cart: $208.00 per K, $52.00/250
2500 pieces, 10 units in cart: $200.00 per K, $50.00/250
3500 pieces, 14 units in cart: $192.00 per K, $48.00/250
-
44 Caliber .429 240 Grain Flat Point(100 ct.)$25.99 As low as $17.00
44 Caliber .429 240 grain round nose flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $19.00 per 100
500 pieces, 5 units in cart: $17.00 per 100
-
45 Caliber .452 200 Grain Flat Point(250 ct.)$45.99 As low as $36.00
45 Caliber .452 200 flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
500 pieces, 2 units in cart: $80.00, $40.00 per 250
2500 pieces, 10 units in cart: $360.00, $144.00 per K, $36.00 per 250
-
Hornady 303 Caliber .310 174 Grain Full Metal Jacket Boat Tail 3131(100 count)$45.99 As low as $40.00
Hornady 303 Caliber .310 diameter 174 grain full metal jacket boat tail projectiles. These bullets feature are very consistent and well constructed. They will do well in 303 British, 7.62 X 54R, 7.7 Jap, 7.65 Argentine, 7.65X53, and any other loads calling for a 303 caliber .310 projectile. Mosins, Enfields, and Arisaka rifles will all eat these bullets up. The old barrels on those guns and the person on the trigger will be the weakest link in the process, not the projectiles.
Quantity Discount As Follows:
300 count, 3 units in cart: $42.00 per 100
500 count, 5 units in cart: $40.00 per 100
-
300 Blackout .308 150 Grain Spire Point(100 ct.)$29.99 As low as $21.00
.308 150 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make supersonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $23.00 per 100
500 pieces, 5 units in cart: $21.00 per 100
Learn More -
300 Blackout .308 180 Grain Spire Point(100 ct.)$31.99 As low as $24.00
.308 180 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $26.00 per 100
500 pieces, 5 units in cart: $24.00 per 100
Learn More -
Northeast 300 Blackout .308 220 Grain Spire Point Subsonic(100 ct.)$35.99 As low as $27.00
.308 220 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
Learn More -
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
-
30 Caliber .308 175 Grain M118 "Long Range" Hollow Point Boat Tail(100 count)$47.99 As low as $37.00
American made, match grade 30 caliber, .308 diameter, 175 grain hollow point boat tail projectiles. These are made by an American manufacturer contracted by a number of governments and security forces worldwide to supply loaded ammunition. It has been quite some time since we had them and the requests have not stopped via phones and email. We have shot them out of our 5R and AR10 with great results. These bullets can be had for a much more attractive price point than the Sierra Matchking. We have converted a good deal of people that shot SMK's and are now using these instead. Anyone looking to make their own M118 "Long Range" ammo these bullets are for you!!
Quanitity Discount as Follows:
Prices include shipping!
3 units, 300 pieces: $43.00 per 100
5 units, 500 pieces: $41.00 per 100
10 units, 1000 pieces: $39.00 per 100
25 units, 2500 pieces: $37.00 per 100
-
9mm 115 Grain Full Metal Jacket Round Nose BR(250 count)$39.99 As low as $20.00
9MM 115 grain full metal jacket bullets made in the USA. These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines. The overall quality and deep volume discount on these projectiles make them a solid buy. We have had excellent feedback on these projectiles from high volume loaders.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $56.00, $28.00/250
4 Units, 1000 pieces: $104.00, $26.00/250
8 Units, 2000 pieces: $192.00, $96.00 per K, $24.00/250
12 Units, 3000 pieces: $264.00, $88.00, $22.00/250
16 units, 4000 pieces: $320.00, $80.00/K, $20.00/250 -
9mm 124 Grain Full Metal Jacket Round Nose BR(250 count)$39.99 As low as $20.00
9MM 124 grain full metal jacket bullets made in the USA. These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines. The overall quality and deep volume discount on these projectiles make them a solid buy. We have had excellent feedback on these projectiles from high volume loaders.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $56.00, $28.00/250
4 Units, 1000 pieces: $104.00, $26.00/250
8 Units, 2000 pieces: $192.00, $96.00 per K, $24.00/250
12 Units, 3000 pieces: $264.00, $88.00, $22.00/250
14 units, 3500 pieces: $280.00, $80.00/K, $20.00/250