Reloading 45-70 Govt: Brass, Bullets and Dies

To reload 45-70 Govt you need four things: clean cases, the right bullets, a set of dies, and current published load data. 45-70 is a big bore black powder era cartridge still loved for lever guns and large game. Below is the plain English rundown of the components, what to look for, and the exact items we stock so you can build accurate 45-70 Govt ammunition at home.

This guide walks through everything that goes into a loaded round of 45-70 Govt, in the order you would actually work through it. We cover brass, bullets, dies and the basic process, then list the 45-70 Govt components you can order from us.

What goes into a reloaded 45-70 Govt cartridge

A finished cartridge is four parts working together: the brass case that holds everything, the primer that lights the charge, the powder that drives the bullet, and the bullet itself. When you reload 45-70 Govt, you reuse the case, fit a fresh primer, add a measured powder charge, and seat a new bullet. Always build your loads from current published load data supplied by the powder and bullet makers, start at the low end, and work up while watching for pressure signs. This article is general education, not a load recipe.

Choosing brass and bullets for 45-70 Govt

Start with quality brass. Sorted once fired 45-70 Govt brass gives you most of the savings of reloading while shooting just as well as new for most uses. Inspect each case for cracks and loose primer pockets, and confirm it is Boxer primed so it can be reloaded. For bullets, match the weight and type to your goal, lighter and faster for target and varmints, heavier and tougher for larger game. We carry a range of 45-70 Govt projectiles to cover both.

The dies and gear you need for 45-70 Govt

A 45-70 Govt die set resizes the fired case, seats the new bullet, and applies any crimp. Add a scale, a way to clean your brass, and a reliable load manual and you have everything to get started. Buy the die set once and it lasts for years of reloading.

The 45-70 Govt components we carry

We stock the components to build this round yourself. Every item ships from our shop, and our brass is sorted and inspected before it goes out.

So what do you need to reload 45-70 Govt?

Clean Boxer primed 45-70 Govt brass, bullets matched to your purpose, a 45-70 Govt die set, and published load data. Get those four right, work up your load carefully, and you can produce 45-70 Govt ammunition that is more accurate and far cheaper than factory.

The reloading process in plain steps

If you are new to this, the order of operations is simple once you see it. Inspect and clean your brass, resize each case and remove the spent primer, seat a fresh primer, drop a measured powder charge, seat the new bullet to the correct depth, and apply a crimp if your load calls for one. Each step has its own tool, and after a few sessions the rhythm becomes second nature. The single most important habit is to measure every powder charge and never rush.

Common mistakes to avoid

The errors that trip up new reloaders are nearly always avoidable. Do not mix headstamps when you are chasing accuracy, do not reuse cracked or loose cases, and never guess at a powder charge. Keep only one powder on the bench at a time so there is no chance of mixing them up, and double check your scale against a known weight. Careful habits keep reloading both safe and rewarding.

Getting started with Northeast Reloading

We have served the reloading community since 2012, and we built this guide to help you shoot more for less. We sell the components, not loaded ammunition, so you stay in control of every round you build. If you have a question about any of the parts above, call the shop and a real person will help you sort it out.

Frequently asked questions

Is it cheaper to reload 45-70 Govt than buy it?
For most shooters yes, especially once you reuse your 45-70 Govt brass several times. The brass is the costly part, so loading it more than once is where the savings come from.

What brass is best for 45-70 Govt?
Clean, sorted, once fired 45-70 Govt brass from a trusted source is ideal for general use. Inspect each case and confirm it is Boxer primed.

What bullet should I use for 45-70 Govt?
Match the bullet to your goal. Lighter bullets suit target and varmint work, heavier bonded or soft point bullets suit larger game.

Do I need special dies for 45-70 Govt?
Yes, a 45-70 Govt specific die set. It resizes the case, seats the bullet and crimps if needed.

Is reloaded 45-70 Govt safe?
It is when you follow published load data, inspect your brass, and work up carefully. Always build your loads from current published load data supplied by the powder and bullet makers, start at the low end, and work up while watching for pressure signs. This article is general education, not a load recipe.

Keep reading and shopping

FROM OUR SHELVES

Shop components

Top Sellers This Week

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare