Search results for: '.40'
- Related search terms
- .40 bullets
- .40 s&w bullets
- .40cal bullets
- .40+Smith+and+wesson
- .40 caliber bullets
-
Hornady XTP 10MM/40 S&W .400 155 Grain Jacketed Hollow Point(100 ct.)$38.99 As low as $29.00
40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue. There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.
Prices include shipping
3 units in cart, 300 pieces: $31.00 per 100
5 units in cart, 500 pieces: $29.00 per 100
Learn More -
40 SW/10MM 180 Grain Jacketed Hollow Point(250 count)$69.99 As low as $56.00
American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target, defense, or general blasting bullet. They are suitable for a defense application as they will expand properly upon contact with soft tissue. These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These bullets are incredibly uniform in weight and diameter and are priced right. Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
40 Smith and Wesson Nickel Plated Law Enforcement Brass(500 pcs)$41.99 As low as $31.00
Excellent quality indoor shot and stored, Nickel 40 S&W brass from our law enforcement contracted ranges. This material has been mechanically sorted 3 times, hand sorted twice, and then tumble cleaned. Our multilayer sorting process followed by a tumbling in cob media ensures accuracy of sort and cleanliness. All brass orders receive an additional 2% on top of the ordered amount to ensure you get your money's worth. Headstamps include but are not limited too Hornady, Remington, Federal, Winchester, and Speer. Anyone looking to make their own defense or match grade ammo, there is no better brass than this!
Quantity discounts as follows
Prices Include Shipping!
1000 count, 2 units in cart: $70.00, $35.00/500
2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500
4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500
-
40 Smith and Wesson Fired Brass (500 count) FREE TUMBLE CLEANING!$36.99 As low as $26.00
All indoor shot and stored 40 Smith and Wesson brass tumbled to a shine and ready to ship out now! This brass was spotless when we received it and we are still running it through our tumblers to give it that extra TLC. This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass. Headstamps include but are not limited to Remington, Federal, Winchester, Blazer, and Speer, all nickel plated brass has been sorted out. We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth. Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically. Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.
Quantity discounts as follows
Prices Include Shipping!
1000 count, 2 units in cart: $60.00, $30.00/500
2000 count, 4 units in cart: $112.00, $56.00 per K, $28.00/500
4000 count, 8 units in cart: $208.00, $52.00 per K, $26.00/500
-
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
Hornady Custom Grade 40 S&W 10MM Auto 3 Die Set 546533$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.
Hornady part number: 546533
UPC #: 90255565331
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
38 Special Fired Brass(500 count) FREE TUMBLE CLEANING!$44.99 As low as $36.00
38 special brass from our indoor contracted ranges, tumble cleaned and ready to ship now! This material was very clean to start and after a thorough tumble cleaning it is absolutely spotless. We have sorted out all nickel plated brass, the headstamps include but are not limited too Remington, Speer, Federal, and Winchester. As with all of our brass it is mechanically sorted 3 times and hand sorted twice to ensure accuracy and to remove lives or damaged brass. We are equipped to sort not only by case diameter, but also by height, this increases accuracy dramatically. Any cases that have a close cousin that are similar in diameter but different in height can be difficult without a machine that sorts by height, a few examples are 380 and 9MM, 38 special and 357 magnum, 357 Sig and 40 SW. Along with our enhanced sorting procedure, we also add an additional 2% to the overall weight of all brass orders to make sure you get your money's worth. Purchase this brass with confidence that you are getting excellent accuracy and quality.
Quantity Discounts as Follows:
Prices include shipping!
1000 count, 2 units in cart: $80.00, $40.00/500
3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500
6000 count, 12 units in cart: $432.00, $72.00 per K, $36.00/500
-
45-70 Government .459 405 Grain Flat Point Lead Cast(100 ct.)$41.99
.459 diameter 405 grain flat point lead cast 45-70 Government bullets. These projectiles feature a beveled base, have been lubed, and are made with a 92/6/2 lead mix giving them a hardness of 16-17 brinell. This lead mix is the most desirable mix and is absolutely necessary for rifle projectiles.
Learn More