Search results for: '22-250+reloading+dies'
- Did you mean
- 22 250 reloading dimens
- 22 250 reloading die
-
Hornady 22-250 Remington 2 Die Set 546220$55.99
New Dimension I Two-Die Rifle Set 22-250 Remington 546220 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
Hornady .223/5.56 .224 60 Grain Spire Point 2270(250 ct.)$45.99 As low as $35.00
Hornady's Spire point have a streamlined design for ultra flat trajectories. Match grade jacket design provides maximum accuracy at all ranges and have explosive expansion, even at low velocities. These projectiles will do well in .223 Remington, 5.56 Nato, 22-250, or any other cartridge calling for a 22 caliber .224 diameter projectile.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $82.00, $41.00/250
1000 pieces, 4 units in cart: $156.00, $39.00/250
2000 pieces, 8 units in cart: $148.00 per K, $37.00/250
7500 pieces, 30 units in cart: $140.00 per K, $35.00/250
-
Hornady 270 Winchester 2 Die Set 546300$55.99
New Dimension I Two-Die Rifle Set 270 Winchester 546300 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
Hornady .223/5.56 55 Grain Full Metal Jacket Boat Tail(250 Count)$41.99 As low as $27.00
.224 diameter, 55 grain Full Metal Jacket boat tail bullets with a serrated cannelure manufactured in the USA by Hornady. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
Hornady 55 Grain Soft Point Boat Tail with Cannelure (250 count)$41.99 As low as $27.00
55 Grain Full metal jacket soft point boat tail bullets with a cannelure for loading .223 Remington, 5.56 Nato, or any other cartridge that calls for a .224 diameter projectile. These projectiles feature a precision drawn copper jacket, a serrated cannelure, and an exposed lead tip which aids in fragmentation upon contact. These bullets make a wonderful target, hunting, or defense load without breaking the bank.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
Nato .223/5.56 62 Grain Full Metal Jacket Boat Tail(250 Count)
.223 Remington/5.56 Nato 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure manufactured in the USA. These projectiles feature a copper drawn jacket, a serrated cannelure, and an all lead core so they will not draw a magnet. Thesy are an excellent economy blasting bullet. These are not a match grade bullet, they are rock solid for the money and will run well. We have had great results loading them for AR platforms to shoot steel targets at 100 and 200 yards with iron sights. For our high volume shoots, these and the 55 Grain Nato bullets are the ones we use. They function well and are priced aggressively.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $56.00, $28.00/250
1000 pieces, 4 units in cart: $104.00, $26.00/250
2000 pieces, 8 units in cart: $96.00 per K, $24.00/250
7500 pieces, 30 units in cart: $88.00 per K, $22.00/250
-
Hornady 62 Grain FMJ BT .223/5.56 Projectiles (250 Count)$46.99 As low as $34.00
Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure. These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them. They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady. They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer. Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $80.00, $40.00/250
1000 pieces, 4 units in cart: $152.00, $38.00/250
2000 pieces, 8 units in cart: $144.00 per K, $36.00/250
7500 pieces, 30 units in cart: $136.00 per K, $34.00/250
-
Hornady .223 Rem/5.56 Nato .224 55 Grain Hollow Point Boat Tail 2263(250 count)$39.99 As low as $32.00
.224 diameter, 55 grain hollow point boat tail bullets with a serrated cannelure manufactured in the USA. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads for punching paper or varmint hunting. The hollow point is small and the shape/profile is designed to feed reliably from a magazine in AR platforms. The consistency in weight and diameter is exceptional and everything you would expect from Hornady. The balance of quality and price in these projectiles make them a rock solid value no matter what your application.
Quantity Discount as follows:
500 pieces, 2 units in cart: $76.00, $38.00/250
1000 pieces, 4 units in cart: $144.00, $36.00/250
2500 pieces, 10 units in cart: $340.00, $136.00 per K, $34.00/250
8000 pieces, 32 units in cart: $1024.00, $128.00 per K, $32.00/250
-
7.62 x 39 Boxer Brass (250 count) FREE TUMBLE CLEANING!$69.99 As low as $58.00
All boxer primed, reloadable, mixed headstamp 7.62 x 39 brass. Headstamps include but not limited to PMC, Fiocchi, Federal, PPU, and Winchester. This brass is all indoor fired and stored and is in great shape. All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is single flash hole, boxer primed brass. A pen light is shined inside every piece to check and separate berdan cases(2 hole). After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders.
Disclaimer: We give an additional 5% over the weight on 7.62 x 39, on all other types of brass we give 2%. 7.62 X 39 has a rough life being shot through AK's and SKS's that are notoriously hard on brass. There will be necks that are not perfectly round, your expander ball on your sizing die will fix this and make it look like new. We spend a fortune on labor removing any brass that has deep gashes or dents. We also remove any necks that are curled inward that your dies cannot fix. There can be small primer pocket brass mixed into this material though it is uncommon. We have put this disclaimer here to explain the simple nature of fired 7.62 x 39, we know this brass is a great product at a price point that is hard to beat. We sell out of this brass every week and more than half of the buyers are repeat customers that have previously bought this material.
Volume Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $120.00, $60.00 per 250
1000 count, 4 units in cart: $232.00, $58.00 per 250
-
303 British Reloadable Fired Brass(100 Count) **FREE TUMBLE CLEANING**$64.99
Excellent quality 303 British brass in stock and ready to ship now! This item does not come around often and when it does it sells fast. Much of what we receive in the way of 303 British is non reloadable berdan cased brass(2 flashholes). The final sort prior to shipping includes looking inside every case with a pen light to make sure no berdan cases get by. This material has been tumble cleaned and as with all brass orders we are adding an additional 2% to the overall weight to ensure you get your money's worth. Purchase this brass with absolute confidence in cleanlinsess and quality of sort.
-
7.62 x 39 BERDAN Brass (250 count) FREE TUMBLE CLEANING!$64.99 As low as $53.00
PLEASE BE SURE YOU CAN LOAD TWO HOLE BERDAN PRIMED CASES. THESE ARE NOT STANDARD BOXER PRIMED(SINGLE HOLE) CASES.
This material is all brass that has been sorted out of our 7.62 x 39 as it has berdan primer pockets(two hole). We have seen an increase in demand for this material, a number of customers have a way of reloading these cases. All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is two hole, berdan primed brass. A pen light is shined inside every piece to check and separate boxer cases(single hole). After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders. This brass, like all of our brass orders will get an additional 2% added to the weight to ensure you get your moneys worth. Purchase this material witih absolute confidence in accuracy of sort, cleanliness, and quality.
Volume Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $110.00, $55.00 per 250
1000 count, 4 units in cart: $212.00, $53.00 per 250
Learn More -
Hornady 380 ACP 3 Die Set Taper Crimp 546518$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we
Learn More -
Hornady Custom Grade 40 S&W 10MM Auto 3 Die Set 546533$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.
Hornady part number: 546533
UPC #: 90255565331
-
Hornady 6.5 PRC 2 Die Set 546281$53.99
Hornady 6.5 PRC 2 Die Set 546281 for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
.308 30 M1 Carbine 110 Grain Full Metal Jacket(250 pcs)$54.99 As low as $39.00
.308 diameter, 30 M1 Carbine 110 grain round nose full metal jacket bullets made in the USA. These projectiles feature a rugged true full metal brass jacket that can withstand the pressures associated with hot military loads. The round nose profile will ensure proper function and feeding from a magazine in the M1 carbine rifle. Anyone looking to replicate original military 30 carbine loads will do well with these projectiles.
Quanity discount as follows
Prices include shipping!
500 pieces, 2 units in cart: $90.00, $45.00 per 250
1000 pieces, 4 units in cart: $172.00, $43.00 per 250
2000 pieces, 8 units in cart: $328.00, $164.00 per K, $41.00 per 250
4000 pieces, 16 units in cart: $624.00, $156.00 per K, $39.00 per 250
-
Hornady Custom Grade 9MM Luger 3 Die Set 546515$62.99
Hornady Custom Grade 9MM Luger 3 Die Set 546515 represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment, and smooth functioning. With one of the finest internal finishes in the industry, Hornady Custom Grade and Match Grade Dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use.
Includes:
- Full length sizer die with titanium sizer ring (does not require case lubrication)
- Seating die
- Expander die
-
Northeast 38 Caliber 125 grain Flat Point(250 count)$44.99 As low as $36.00
38 Caliber 125 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $80.00, $40.00/250
4 units, 1000 pieces: $152.00, $38.00/250
12 Units, 3000 pieces: $432.00, $144.00/k, $36.00/250
-
45 ACP Premium Defense 230 Grain Jacketed Hollow Point(250 count)$67.99 As low as $61.00
American made, premium 45 ACP 230 grain Jacketed Hollow Point Bullets in stock and ready to ship. These projectiles feature a lead swaged core that is bonded to its copper jacket. Recomended velocity is 825 FPS to 975 FPS for reliable expansion and terminal performance. In test results these projectiles penetrated between 11 and 13 inches of ballistic gel and retained 99% of their original weight. These projectiles make a devestating hunting or defense bullet at a paper punching price.
Quantity Discount as Follows:
Prices include shipping!
500 pieces, 2 units in cart: $130.00, $65.00 per 250
1000 pieces, 4 units in cart: $252.00, $63.00 per 250
2000 pieces, 8 units in cart: $488.00, $244.00 per K, $61.00 per 250
-
357 magnum fired brass(250 count) FREE TUMBLE CLEANING!$42.99 As low as $24.00
All indoor shot and stored 357 magnum fired brass, tumble cleaned and fully sorted to remove any nickel plated brass. As we have mentioned on other product pages regarding our brass, this material is 3 times sorted mechanically and 2 times sorted by hand to remove any damages, lives, or foreign calibers. The key component to our sorting process when dealing with either 38 special or 357 magnum is having a machine in house that sorts by height. The accuracy of our 357 magnum sort is exceptional due to the fact that we are able to sort not only by case diameter but also by height. We are tumble cleaning this material to a nice shine and as with all of our brass we are adding 2% to the overall wieght of the order to ensure you get your money's worth. The headstamps in this brass include but are not limited to Remington, Federal, Speer, Winchester, and Starline. You can purchase this brass with absolute confidence in overall quality, accuracy of sort, and cleanliness.
Quantity Discount as follows, there are automatically applied discounts once you add these to your cart!
500 count, 2 units in cart: $60.00, $30.00/250
1000 count, 4 units in cart: $112.00, $28.00/250
2000 count, 8 units in cart: $208.00, $104.00 per K, $26.00/250
3000 count, 12 units in cart: $288.00, $96.00 per K, $24.00/250
Learn More -
Hornady Custom Grade 38/357 Mag/357 Max 3 Die Set 546527$66.99
Hornady Custom Grade Hornady Custom Grade 38/357 Mag/357 Max 3 Die Set 546527 represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment, and smooth functioning. With one of the finest internal finishes in the industry, Hornady Custom Grade and Match Grade Dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use.
Includes:
- Full length sizer die with titanium sizer ring (does not require case lubrication)
- Seating die
- Expander die
-
Hornady Custom Grade 45 ACP/45 Win Mag Titanium Nitride 3 Die Set 546554$65.99
Hornady Custom Grade 45 ACP/45 Win Mag Titanium Nitride 3 Die Set 546554 represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment, and smooth functioning. With one of the finest internal finishes in the industry, Hornady Custom Grade and Match Grade Dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use.
Includes:
- Full length sizer die with titanium sizer ring (does not require case lubrication)
- Seating die
- Expander die
-
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More