Search results for: 'Brass for .30 carbine'A=0'

This parts kit includes everything needed to complete your lower receiver build. Both the trigger and hammer are machined from stainless steel for excellent corrosion resistance. This parts kit is an exceptional value for those looking for a quality parts kit made in the USA. 

Quantity Discount As Follows:

Prices Include Shipping!

2 Parts Kits: $46.00 Each

5 Parts Kits: $45.00 Each

8 Parts Kits: $44.00 Each

All indoor shot and stored large primer 45 ACP, mixed stamp material, fully sorted to remove small primer and nickel plated brass.  This is one of our best selling products on the site and for good reason.  It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers.  Once it is brought to all 45 ACP it is then sorted by hand again to remove any small primer pocket brass.  As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth.  Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.  

We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed.  The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.

Quantity Discount as Follows:

Prices Always include shipping!

1000 count, 2 units in cart: $118.00, $59.00/500

1500 count, 3 units in cart: $171.00, $114.00 per K, $57.00/500

3000 count, 6 units in cart: $330.00, $110.00 per K, $55.00/500

All indoor shot and stored 40 Smith and Wesson brass tumbled to a shine and ready to ship out now!  This brass was spotless when we received it and we are still running it through our tumblers to give it that extra TLC.  This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass.  Headstamps include but are not limited to Remington, Federal, Winchester, Blazer, and Speer, all nickel plated brass has been sorted out.  We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth.  Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically.  Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $70.00, $35.00/500

2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500

4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500

All indoor shot and stored 30-06 Springfield brass LAKE CITY STAMPS ONLY, tumble cleaned and ready to go.  Anyone looking to clone 30-06 M2 loads, this is your brass!  This material is in excellent shape, it was clean to begin with and after passing it through our tumblers it has a nice shine.  This brass has been mechanically sorted 3 times and hand sorted 2 times before shipping.  As with all of our brass orders we add an additional 2% to the overall weight to ensure you get your money's worth.  A pen light is used to check every piece to make sure no berdan primed cases are present(2 hole non reloadable cases).  Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.

Note:  Lake City 30-06 Springfield brass has crimped primer pockets, you will need to swage the primer pockets to seat a new primer.  This is the case with all Lake City military brass.

Excellent quality indoor shot and stored, Nickel 40 S&W brass from our law enforcement contracted ranges.  This material has been mechanically sorted 3 times, hand sorted twice, and then tumble cleaned.  Our multilayer sorting process followed by a tumbling in cob media ensures accuracy of sort and cleanliness.  All brass orders receive an additional 2% on top of the ordered amount to ensure you get your money's worth.  Headstamps include but are not limited too Hornady, Remington, Federal, Winchester, and Speer.  Anyone looking to make their own defense or match grade ammo, there is no better brass than this!

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $70.00, $35.00/500

2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500

4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500

Polished 30 Carbine range brass, in stock and ready to ship now! After this material passes through our multi layered sorting process it must then be hand sorted for several reasons. Nearly every lot of 30 carbine brass has berdan(2 hole) primed cases and 327 Federal cases mixed in. Before shipping our employees look inside every case by hand with a pen light to ensure you only get reloadable boxer primed cases, no berdan cases in your order. 327 Federal is another problem with 30 Carbine brass, 327 is very similar in diameter and length but is a rimmed cartridge. Our employees will inspect every head stamp by eye/hand to make sure no 327 ends up in your order either.  After this extensive sorting process, the yield of any load of 30 carbine are dramatically reduced, sometimes by as much as 35%!  Until now we always kept 30 Carbine for our gunshow or local customers.  We were able to produce enough to make a product on the website so here it is!

IF THERE IS NO ADD TO CART BUTTON, THIS PRODUCT IS OUT OF STOCK.  PLEASE CLICK THE LINK BELOW TO SEE OUR PROCESSED READY TO LOAD 30 CARBINE!

LINK TO PROCESSED 30 CARBINE BRASS

American made, .451 diameter 230 grain 45 ACP full metal jacket bullets! These are a copper jacketed bullet with a swaged lead core made right here in the USA!  Anyone looking to make traditional ball ammo for pistols or even carbines this is your bullet. You can hammer these down range @ +P velocities without worrying as the jacket is extremely rugged and thick.  When we weighed and measured these bullets we were very satisfied with the consistency of the weights and diameters.  

Quantity Discount as Follows:

Prices include shipping!

500 pieces, 2 units in cart: $120.00, $60.00 per 250

1000 pieces, 4 units in cart: $232.00, $58.00 per 250

2000 pieces, 8 units in cart: $448.00, $224.00 per K, $56.00 per 250

380 ACP 95 grain full metal jacket bullets made in the USA.  These bullets feature a precision drawn jacket with a lead core.  The brass jacket is very rugged and can handle plus P velocities with ease.  

Quantity Discount

Prices include shipping!!

500 pieces, 2 units in cart: $68.00, $34.00/250

1000 pieces, 4 units in cart: $128.00 per K

2000 pieces, 8 units in cart: $124.00 per K

4000 piece mega case lot, 16 units in cart: $100.00 per K

45 ACP .451 diameter 230 Grain Jacketed Hollow Point bullets made in the USA.  These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile.  They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges.  The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue.  These bullets will expand, pedals will form, and they will mushroom making them suitable in a hunting or self defense application.  Whether you are a target shooter or plan on using these bullets for hunting or self defense this is tough price point to beat for such a versatile do it all projectile.

Volume Discount As Follows:

Prices include shipping!

300 pieces, 3 units in cart: $26.00/100

500 pieces, 5 units in cart: $24.00/100

1000 pieces, 10 units in cart: $22.00/100

2000 pieces, 20 units in cart: $20.00/100

380 ACP 90 Grain Jacketed Hollow Point bullets made in the USA.  These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile.  They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges.  The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue.  These bullets will expand, pedals will form, and they will mushroom making them suitable for a self defense application.  Whether you are looking for an accurate target bullet or a defense bullet, these projectiles will perform at a price point that is tough to beat.  

Quantity discount as follows:

Prices include shipping!!

2 units, 500 pieces: $78.00, $39.00/250

4 units, 1000 pieces: $148.00, $37.00/250

8 units, 2000 pieces: $280.00, $140.00 per K, $35.00/250

16 units, 4000 pieces: $528.00, $132.00 per K, $33.00/250

32 units, 8000 pieces: $992.00, $124.00 per K, $31.00/250

64 units, 16000 pieces: $1856.00, $116.00 per K, $29.00/250

45 ACP 185 Grain Semi Wadcutter lead cast bullets ready to ship now!  These bullets feature a lubed groove in a precision swaged semi wadcutter bullet profile.  We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles.

Quantity Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $68.00, $34.00/250

1000 Count, 4 units in cart: $128.00, $32.00/250

2500 Count, 10 units in cart:  $300.00, $120.00 per K, $30.00/250

All indoor shot and stored 300 Blackout brass is in stock and ready to ship now!  As with all of our brass it has been sorted mechanically 3 times and by hand twice.  The large majority of the material is original 300 blackout headstamps though there can be some converted cases present.  It is spotless as we have tumble cleaned it and we are adding an additional 2% to the overall weight of the order ensuring you get your money's worth.  Purchase brass from Northeast with 100% confidence in quality of sort and cleanliness.  

Quantity discount as follows, prices include shipping!

500 pieces, 2 units in cart: $108.00, $54.00 per 250 count

1000 pieces, 4 units in cart: $208.00, $52.00 per 250 count

IF THERE IS NO ADD TO CART BUTTON ON THIS PAGE, THE PRODUCT IS OUT OF STOCK.  CHECK OUT OUR FULLY PROCESSED SAME STAMP 300 BLACKOUT!

CLICK TO SEE SAME STAMP 300 BLACKOUT READY TO LOAD BRASS!

38 Caliber 125 Grain round nose coated bullets now available at Northeast!  These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  The coating is a polymer based material that has been tested extensively for optimal performance.  The coating material reduces friction and wear on your barrel and will not smoke.  Unlike traditional lead cast bullets, these will not leave any leading in the barrel.  This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter.  These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter.  The price point on these bullets is such that even the most cost conscious shooters can justify using them.  Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

45 Colt 250 grain round nose flat point coated bullets now available at Northeast!  These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  The coating is a polymer based material that has been tested extensively for optimal performance.  The coating material reduces friction and wear on your barrel and will not smoke.  Unlike traditional lead cast bullets, these will not leave any leading in the barrel.  This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter.  These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter.  The price point on these bullets is such that even the most cost conscious shooters can justify using them.  Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

Quantity Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $78.00, $39.00 per 250

1000 Count, 4 units in cart: $148.00, $37.00 per 250

2000 Count, 8 units in cart: $280.00, $140.00 per K, $35.00 per 250

40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

American made, .451 diameter, 185 grain, 45 ACP full metal jacket bullets in stock and ready to ship now. These are a copper jacketed bullet with a swaged lead core made right here in the USA!  You can hammer these down range @ +P velocities without worrying as the jacket is extremely rugged and thick.  When we weighed and measured these bullets we were very satisfied with the consistency of the weights and diameters.  These bullets have become a staple among our 45 ACP guys.  Purchase these projectiles with absolute confidence in quality and consistency.

Quantity Discount as Follows:

Prices include shipping!

2 units, 500 pieces: $78.00, $39.00/250

4 units, 1000 pieces: $148.00, $37.00/250

10 units, 2500 pieces: $350.00, $140.00/K, $35.00/250

9MM 125 Grain round nose coated bullets now available at Northeast!  These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  The coating is a polymer based material that has been tested extensively for optimal performance.  The coating material reduces friction and wear on your barrel and will not smoke.  Unlike traditional lead cast bullets, these will not leave any leading in the barrel.  This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter.  These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter.  The price point on these bullets is such that even the most cost conscious shooters can justify using them.  Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

9MM 115 Grain round nose coated bullets now available at Northeast!  These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  The coating is a polymer based material that has been tested extensively for optimal performance.  The coating material reduces friction and wear on your barrel and will not smoke.  Unlike traditional lead cast bullets, these will not leave any leading in the barrel.  This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter.  These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter.  The price point on these bullets is such that even the most cost conscious shooters can justify using them.  Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

9MM 147 Grain flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

45 ACP 230 Grain round nose coated bullets now available at Northeast!  These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  The coating is a polymer based material that has been tested extensively for optimal performance.  The coating material reduces friction and wear on your barrel and will not smoke.  Unlike traditional lead cast bullets, these will not leave any leading in the barrel.  This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter.  These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter.  The price point on these bullets is such that even the most cost conscious shooters can justify using them.  Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

45 ACP 230 Grain Round Nose lead cast bullets ready to ship now!  These bullets feature a lubed groove in a precision cast round nose bullet profile.  We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles.

Quantity Discount as Follows:

Prices include shipping!

500 pieces, 2 units in cart: $78.00, $39.00/250

1000 pieces, 4 units in cart: $148.00, $37.00/250

2000 pieces, 8 units in cart:  $140.00 per K, $35.00/250

45 ACP 200 Grain Semi Wadcutter lead cast bullets ready to ship now!  These bullets feature a lubed groove in a precision swaged semi wadcutter bullet profile.  We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles.  These bullets will make accurate target loads while not breaking the bank.

Quantity Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $72.00, $36.00 per 250

1000 Count, 4 units in cart: $136, $34.00 per 250

2500 Count, 10 units in cart: $128.00 per K, 32.00 per 250

American made, premium 45 ACP 230 grain Jacketed Hollow Point Bullets in stock and ready to ship.  These projectiles feature a lead swaged core that is bonded to its copper jacket.  Recomended velocity is 825 FPS to 975 FPS for reliable expansion and terminal performance. In test results these projectiles penetrated between 11 and 13 inches of ballistic gel and retained 99% of their original weight.  These projectiles make a devestating hunting or defense bullet at a paper punching price.  

Quantity Discount as Follows:

Prices include shipping!

500 pieces, 2 units in cart: $130.00, $65.00 per 250

1000 pieces, 4 units in cart: $252.00, $63.00 per 250

2000 pieces, 8 units in cart: $488.00, $244.00 per K, $61.00 per 250