Search results for: 'fmj" AND 6050 IN (SELECT (CHAR(113) CHAR(122) CHAR(106) CHAR(120) CHAR(113) (SELECT (CASE WHEN (6050=6050) THEN CHAR(49) ELSE CH'

Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure.  These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them.  They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady.  They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer.  Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.

Quantity Discount as follows:

Prices include freight!

500 pieces, 2 units in cart: $80.00, $40.00/250

1000 pieces, 4 units in cart: $152.00, $38.00/250

2000 pieces, 8 units in cart: $144.00 per K, $36.00/250

7500 pieces, 30 units in cart: $136.00 per K, $34.00/250

40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

Excellent quality indoor shot and stored, Nickel 40 S&W brass from our law enforcement contracted ranges.  This material has been mechanically sorted 3 times, hand sorted twice, and then tumble cleaned.  Our multilayer sorting process followed by a tumbling in cob media ensures accuracy of sort and cleanliness.  All brass orders receive an additional 2% on top of the ordered amount to ensure you get your money's worth.  Headstamps include but are not limited too Hornady, Remington, Federal, Winchester, and Speer.  Anyone looking to make their own defense or match grade ammo, there is no better brass than this!

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $70.00, $35.00/500

2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500

4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500

All indoor shot and stored 40 Smith and Wesson brass tumbled to a shine and ready to ship out now!  This brass was spotless when we received it and we are still running it through our tumblers to give it that extra TLC.  This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass.  Headstamps include but are not limited to Remington, Federal, Winchester, Blazer, and Speer, all nickel plated brass has been sorted out.  We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth.  Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically.  Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $60.00, $30.00/500

2000 count, 4 units in cart: $112.00, $56.00 per K, $28.00/500

4000 count, 8 units in cart: $208.00, $52.00 per K, $26.00/500

9MM .356 124 grain round nose plated bullets manufactured in the USA.   Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling.  Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. 

After years of trying a number of plated bullet companies, we have found these to be superior to all others.  These are not a foreign made, sub par product commonly peddled online.  The consistency in weight and diameter along with a thick plating make these truly superior to others.  We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else. 

9MM .356 147 grain round nose plated bullets manufactured in the USA.   Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling.  Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. 

After years of trying a number of plated bullet companies, we have found these to be superior to all others.  These are not a foreign made, sub par product commonly peddled online.  The consistency in weight and diameter along with a thick plating make these truly superior to others.  We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.

350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA.  These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom.   Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling.  Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. 

After years of trying a number of plated bullet companies, we have found these to be superior to all others.  These are not a foreign made, sub par product commonly peddled online.  The consistency in weight and diameter along with a thick plating make these truly superior to others.  We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.

Quantity Discount as Follows:

Prices Include Shipping!

300 pieces, 3 units in cart: $28.00 per 100

500 pieces, 5 units in cart: $26.00 per 100

350 grain .458 diameter flat point plated bullets manufactured in the USA.  These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom.   Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling.  Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. 

After years of trying a number of plated bullet companies, we have found these to be superior to all others.  These are not a foreign made, sub par product commonly peddled online.  The consistency in weight and diameter along with a thick plating make these truly superior to others.  We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.

Quantity Discount as Follows:

Prices Include Shipping!

300 pieces, 3 units in cart: $28.00 per 100

500 pieces, 5 units in cart: $26.00 per 100

Excellent quality 303 British brass in stock and ready to ship now!  This item does not come around often and when it does it sells fast.  Much of what we receive in the way of 303 British is non reloadable berdan cased brass(2 flashholes).  The final sort prior to shipping includes looking inside every case with a pen light to make sure no berdan cases get by.  This material has been tumble cleaned and as with all brass orders we are adding an additional 2% to the overall weight to ensure you get your money's worth.  Purchase this brass with absolute confidence in cleanlinsess and quality of sort.

All indoor shot and stored small primer 45 ACP fully sorted to remove large primer pocket and yellow brass.  It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any large primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.

We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently, nickel plated brass has a 50/50 ratio of small to large primer pocket material.  The time it takes to sort this material properly, the way our customers have come to expect has increased tremendously from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.

Quantity Discount as Follows:

Prices always include shipping!

1000 pieces, 2 units in cart: $118.00 Per K

1500 pieces, 3 units in cart: $171.00, $114.00 Per K, $57.00/500

3000 pieces, 6 units in cart:  $330.00, $110.00 Per K, $55.00/500

All indoor shot and stored large primer 45 ACP, mixed stamp material, fully sorted to remove small primer and nickel plated brass.  This is one of our best selling products on the site and for good reason.  It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers.  Once it is brought to all 45 ACP it is then sorted by hand again to remove any small primer pocket brass.  As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth.  Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.  

We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed.  The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.

Quantity Discount as Follows:

Prices Always include shipping!

1000 count, 2 units in cart: $84.00, $42.00/500

1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500

3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500

2 Die Set

2 Die Set

2 Die Set.