Search results for: 'fmj') OR EXTRACTVALUE(2311,CONCAT(0x5c,0x717a6a7871,(SELECT (ELT(2311=2311,1))),0x716b767671)) AND ('qmDG'='qmDG'

Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure.  These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them.  They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady.  They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer.  Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.

Quantity Discount as follows:

Prices include freight!

500 pieces, 2 units in cart: $80.00, $40.00/250

1000 pieces, 4 units in cart: $152.00, $38.00/250

2000 pieces, 8 units in cart: $144.00 per K, $36.00/250

7500 pieces, 30 units in cart: $136.00 per K, $34.00/250

 

 

 

Learn More

40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

Learn More

40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

Learn More

Excellent quality indoor shot and stored, Nickel 40 S&W brass from our law enforcement contracted ranges.  This material has been mechanically sorted 3 times, hand sorted twice, and then tumble cleaned.  Our multilayer sorting process followed by a tumbling in cob media ensures accuracy of sort and cleanliness.  All brass orders receive an additional 2% on top of the ordered amount to ensure you get your money's worth.  Headstamps include but are not limited too Hornady, Remington, Federal, Winchester, and Speer.  Anyone looking to make their own defense or match grade ammo, there is no better brass than this!

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $70.00, $35.00/500

2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500

4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500

 

Learn More

All indoor shot and stored 40 Smith and Wesson brass tumbled to a shine and ready to ship out now!  This brass was spotless when we received it and we are still running it through our tumblers to give it that extra TLC.  This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass.  Headstamps include but are not limited to Remington, Federal, Winchester, Blazer, and Speer, all nickel plated brass has been sorted out.  We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth.  Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically.  Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.

Quantity discounts as follows

Prices Include Shipping!

1000 count, 2 units in cart: $60.00, $30.00/500

2000 count, 4 units in cart: $112.00, $56.00 per K, $28.00/500

4000 count, 8 units in cart: $208.00, $52.00 per K, $26.00/500

 

Learn More

9MM 115 grain full metal jacket bullets made in the USA.  These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines.  The overall quality and deep volume discount on these projectiles make them a solid buy.  We have had excellent feedback on these projectiles from high volume loaders.

Learn More

9MM 124 grain full metal jacket bullets made in the USA.  These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines.  The overall quality and deep volume discount on these projectiles make them a solid buy.  We have had excellent feedback on these projectiles from high volume loaders.

Learn More

.224 diameter, 55 grain Full Metal Jacket boat tail bullets with a serrated cannelure manufactured in the USA by Hornady. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile.  These will make exceptional 5.56 Nato or .223 Remington loads. 

 Quantity Discount as follows:

500 pieces, 2 units in cart: $68.00, $34.00/250

1000 pieces, 4 units in cart: $128.00, $32.00/250

2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250

8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250

 

 

 

 

 

Learn More

Premium American made, .357 diameter 125 grain full metal jacket projectiles. These bullets are very consistent and feature a precision drawn copper jacket and a lead core with a cannelure.  These can be used in 38 special or in the higher pressured 357 magnum, they can withstand magnum pressures with no problem at all.  The cannelure on these projectiles enable you to aggresively crimp them which is neccesary in a higher recoil application such as 357 magnum.  We have a number of customers using these in 357 magnum lever guns at very high velocities with no issues.  

Quantity Discount as Follows

500 pieces, 2 units in cart: $80.00, $40.00/250

1000 pieces, 4 units in cart: $152.00 per K, $38.00/250

2500 pieces, 10 units in cart: $144.00 per K, $36.00/250

3500 pieces, 14 units in cart: $136.00 per K, $34.00/250

 

Learn More

Excellent quality indoor shot and stored M118 LR "Long Range" Lake City 308 Winchester brass. This particular brass has the LR designation on the head stamp which indicates it began life as M118 LR Long Range ammunition loaded with a 175 grain Sierra Match King. This brass is from Lake City but unlike its more commonly seen M80 ball cousin(loaded with a 147 Grain FMJ) it does not have a crimped primer pocket. To seat a new primer in this particular brass, you do NOT need to swage or ream the primer pocket. M118 LR is used by many military and police agencies globally for long range engagements. Anyone looking to replicate long range military loadings can use this brass in conjunction with a 175 grain Sierra Match King and Federal Large Rifle Match primers. This brass comes in very small quantities, we rarely have enough to market it on the site like this. It will sell quickly! Learn More

32 caliber .313 diameter, 100 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

For Quantity Discount, put two units in  your cart(500 ct.) and pay just $54.00 delivered!

Learn More

38 caliber .358 diameter, 125 grain nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

For quantity discount, put 4 units(1000 pieces) in cart and pay just $108.00 delivered!

Learn More

44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!

 

Learn More

Hornady 303 Caliber .310 diameter 174 grain full metal jacket boat tail projectiles.  These bullets feature are very consistent and well constructed.  They will do well in 303 British, 7.62 X 54R, 7.7 Jap, 7.65 Argentine, 7.65X53, and any other loads calling for a 303 caliber .310 projectile.  Mosins, Enfields, and Arisaka rifles will all eat these bullets up.  The old barrels on those guns and the person on the trigger will be the weakest link in the process, not the projectiles.

Quantity Discount As Follows:

300 count, 3 units in cart: $42.00 per 100

500 count, 5 units in cart: $40.00 per 100

 

Learn More

.223 Remington/5.56 Nato 55 grain Full Metal Jacket boat tail, .224 diameter, with cannelure manufactured in the USA. These projectiles feature a copper drawn jacket, a serrated cannelure, and an all lead core so they will not draw a magnet.  Thesy are an excellent economy blasting bullet.  These are not a match grade bullet, they are rock solid for the money and will run well.  We have had great results loading them for AR platforms to shoot steel targets at 100 and 200 yards with iron sights.  For our high volume shoots, these and the 62 Grain Nato bullets are the ones we use.  They function well and are priced aggressively.

Quantity Discount as follows:

Prices include freight!

500 pieces, 2 units in cart: $52.00, $26.00/250

1000 pieces, 4 units in cart: $96.00, $24.00/250

2000 pieces, 8 units in cart: $88.00 per K, $22.00/250

8000 pieces, 32 units in cart: $80.00 per K, $20.00/250

 

 

 

 

 

Learn More

The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we

Learn More

The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.

Hornady part number: 546533

UPC #: 90255565331

 

Learn More

Lee Part Number: 90506

UPC #: 734307905064

Learn More

Lee Part Number: 90557

UPC #: 734307905576

Learn More

Lee Part Number: 90482

UPC #: 734307904821

Learn More

Lee Part Number: 90537

UPC #: 734307905378

Learn More

American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads.  They feature a precision drawn copper jacket fully enclosing its base leaving  no exposed lead for a very clean shooting and accurate projectile.  These bullets make a wonderful target, defense, or general blasting bullet.  They are suitable for a defense application as they will expand properly upon contact with soft tissue.  These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM.  

Quantity discount as follows:

Prices include shipping

500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.

2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250

Learn More

American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads.  These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM.  These bullets are incredibly uniform in weight and diameter and are priced right.  Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.  

Quantity discount as follows:

Prices include shipping 

500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.

2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250

Learn More

4 Die Set

Learn More

45 ACP .451 diameter 230 Grain Jacketed Hollow Point bullets made in the USA.  These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile.  They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges.  The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue.  These bullets will expand, pedals will form, and they will mushroom making them suitable in a hunting or self defense application.  Whether you are a target shooter or plan on using these bullets for hunting or self defense this is tough price point to beat for such a versatile do it all projectile.

Volume Discount As Follows:

Prices include shipping!

300 pieces, 3 units in cart: $24.00/100

500 pieces, 5 units in cart: $22.00/100

1000 pieces, 10 units in cart: $20.00/100

2000 pieces, 20 units in cart: $18.00/100

Learn More