Search results for: 'fmj OR (SELECT 9880 FROM(SELECT COUNT(*),CONCAT(0x717a6a7871,(SELECT (ELT(9880=9880,1))),0x716b767671,FLOOR(RAND(0)*2))x FROM IN'

Hornady .310 diameter 123 grain full metal jacket bullets with a cannelure perfect for all 7.62 X 39 loadings.  A number of customers have reported excellent results not just in Ak's and Mini 30's but most recently AR15 platforms chambered in 7.62 X 39. These bullets feature a precision drawn copper jacket and a lead core and will not draw a magnet.  Asides from being incredibly consistent in weight and diameter, they have a very clean appearance.  Hornady has done a wonderful job with thest bullets.

Quantity Discount As Follows:

500 count, 5 units in cart:  $32.00/100 ct.

1000 count, 10 units in cart:  $30.00/100 ct.

2500 count, 20 units in cart:  $28.00/100 ct.

Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure.  These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them.  They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady.  They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer.  Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.

Quantity Discount as follows:

Prices include freight!

500 pieces, 2 units in cart: $80.00, $40.00/250

1000 pieces, 4 units in cart: $152.00, $38.00/250

2000 pieces, 8 units in cart: $144.00 per K, $36.00/250

7500 pieces, 30 units in cart: $136.00 per K, $34.00/250

All boxer primed, reloadable, mixed headstamp 7.62 x 39 brass. Headstamps include but not limited to PMC, Fiocchi, Federal, PPU, and Winchester. This brass is all indoor fired and stored and is in great shape.  All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is single flash hole, boxer primed brass.  A pen light is shined inside every piece to check and separate berdan cases(2 hole).  After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders. 

Disclaimer:  We give an additional 5% over the weight on 7.62 x 39, on all other types of brass we give 2%.  7.62 X 39 has a rough life being shot through AK's and SKS's that are notoriously hard on brass.  There will be necks that are not perfectly round, your expander ball on your sizing die will fix this and make it look like new.  We spend a fortune on labor removing any brass that has deep gashes or dents. We also remove any necks that are curled inward that your dies cannot fix.  There can be small primer pocket brass mixed into this material though it is uncommon.  We have put this disclaimer here to explain the simple nature of fired 7.62 x 39, we know this brass is a great product at a price point that is hard to beat.  We sell out of this brass every week and more than half of the buyers are repeat customers that have previously bought this material.  

Volume Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $120.00, $60.00 per 250

1000 count, 4 units in cart: $232.00, $58.00 per 250

All indoor shot and stored 5.7 X 28MM fired brass. This material is very clean, we do not polish it in order to preserve the factory coating that ensures reliable function. We have started to accumulate enough of this brass to warrant making a product on the site for our customers.  As with all of our brass orders we add an additional 2% to the weight of the order to ensure you get your money's worth.  

Quantity Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $54.00, $27.00 per 250

1000 count, 4 units in cart: $100.00, $25.00 per 250

2000 count, 8 units in cart: $184.00, $92.00 per K, $23.00/250

6000 count, 24 units in cart: $504.00, $84.00 per K, $21.00/250

PLEASE BE SURE YOU CAN LOAD TWO HOLE BERDAN PRIMED CASES.  THESE ARE NOT STANDARD BOXER PRIMED(SINGLE HOLE) CASES.

This material is all brass that has been sorted out of our 7.62 x 39 as it has berdan primer pockets(two hole).  We have seen an increase in demand for this material, a number of customers have a way of reloading these cases.  All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is two hole,  berdan primed brass.  A pen light is shined inside every piece to check and separate boxer cases(single hole).  After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders.  This brass, like all of our brass orders will get an additional 2% added to the weight to ensure you get your moneys worth.  Purchase this material witih absolute confidence in accuracy of sort, cleanliness, and quality.

Volume Discount As Follows:

Prices include shipping!

500 count, 2 units in cart: $110.00, $55.00 per 250

1000 count, 4 units in cart: $212.00, $53.00 per 250

Excellent quality 7.62 X 54R brass in stock and ready to ship now!  This brass has been mechanically sorted three times and hand sorted twice.  We have also added the step of looking inside every case to make sure there are no berdan cases(2 hole, non reloadable).  PPU and S&B stamps will dominate this material.  It was very clean to begin with but we have still run it through our tumblers!

Mixed headstamp 308 winchester/7.62 X 51MM brass from our indoor shooting ranges.  This brass includes both military crimped primer brass and commercial non crimped primer pocket brass.  Every piece of this brass has been checked with pen light inside, one by one, to remove berdan primed cases(2 hole non reloadable brass).  We spend a tremendous amount of time and labor sorting this material but customer satisfaction and repeat purchases tell us it is well worth it.  As with all brass orders, we add an additional 2% to the overall weight and tumble clean the material at no additional charge.  Purchase this brass with absolute confidence in quality, cleanliness, accuracy of sort, and price.

WE OFFER THIS MIXED STAMP MATERIAL FOR THOSE THAT ARE JUST LOOKING FOR THE CHEAPEST 308 WINCHESTER/7.62 X 51 BRASS FOR PLINKING AND FUN AT THE RANGE.  IF YOU PREFER ALL SAME STAMP BRASS, YOU CAN CHECKOUT OUR "SAME STAMP 308 WINCHESTER BRASS PAGE BY CLICKING THIS BLUE FONT"

 Quantity Discounts As Follows:

Prices include shipping!

500 count, 2 units in cart: $84.00, $42.00/250

750 count, 3 units in cart: $160.00 per K, $40.00/250

1250 count, 5 units in cart: $152.00 per K,  $38.00/250

2500 count, 10 units in cart: $144.00 per K, $36.00/250

9MM 115 grain full metal jacket bullets made in the USA.  These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines.  The overall quality and deep volume discount on these projectiles make them a solid buy.  We have had excellent feedback on these projectiles from high volume loaders.

9MM 124 grain full metal jacket bullets made in the USA.  These projectiles feature a rugged true full metal brass jacket that can easily handle + P velocities out of pistols or carbines.  The overall quality and deep volume discount on these projectiles make them a solid buy.  We have had excellent feedback on these projectiles from high volume loaders.

3 Die Set

2 Die Set

22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady.  We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges.  Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.

Quantity discount as follows:

Prices include shipping!

500 count, 2 units in cart: $88.00

1000 count, 4 units in cart: $168.00

2500 count, 10 units in cart: $160.00 per 1000

8000 count, 32 units in cart: $152.00 per 1000

40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

New Dimension I Two-Die Rifle Set .223 Remington 546228 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

Hornady 6MM ARC 2 Die Set 546251 for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

Hornady 303 Caliber .310 diameter 174 grain full metal jacket boat tail projectiles.  These bullets feature are very consistent and well constructed.  They will do well in 303 British, 7.62 X 54R, 7.7 Jap, 7.65 Argentine, 7.65X53, and any other loads calling for a 303 caliber .310 projectile.  Mosins, Enfields, and Arisaka rifles will all eat these bullets up.  The old barrels on those guns and the person on the trigger will be the weakest link in the process, not the projectiles.

Quantity Discount As Follows:

300 count, 3 units in cart: $42.00 per 100

500 count, 5 units in cart: $40.00 per 100

Hornady 7MM Remington Magnum 2 Die Set 546326 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

Hornady 25-06 Remington 2 Die Set 546262 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

All same stamp PPU Prvi Partizan manufactured 308 Winchester brass tumbled and ready to ship.  This material has both 7.62 X 51 and 308 winchester stamp, the only difference is the laquer primer sealant in the 7.62 X 51 and that it says 7.62 X 51 on the headstamp.  We had a customer send us an email explaing that he measured the case volume of both PPU 308 stamps and its 7.62 X 51 cousin, they both held the same exact volume of water.  We can say with almost absolute certainty that they are the same exact cases other than the headstamp and the red sealant.  This material has been mechanically sorted three times and hand sorted three times.  We are adding an additional 2% to the overall weight to ensure you get your money's worth.  Purchase this material with absolute confidence in quality of sort and cleanliness!

For quantity discount, please put 3 units or more in your cart!

300 count, 3 units in cart: $66.00, $22.00 per 100

New Dimension I Two-Die Rifle Set 308 Winchester 546358 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

New Dimension I Two-Die Rifle Set 204 Ruger 546201 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

New Dimension I Two-Die Rifle Set 224 Valkyrie 546211 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.

New Dimension I Two-Die Rifle Set 7MM PRC 546313 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.