Search results for: 'Reloading press'
- Did you mean
- reloading precis
- reloading process
- Related search terms
- Reloading 380 bullet'nvOpzp; AND 1=1 OR (<'">iKO)),
- reloading bullets 1000 357
- reloading die set reloading do ship
- reloading bullets 30 calib carbid 1000 grain
- reloading die ship reloading die shine
-
Northeast 9mm 124 Grain Round Nose (250 count)$33.99 As low as $22.00
9MM .356 124 grain round nose plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discounts as Follows:
2 Units, 500 pieces: $56.00, $28.00/250
4 Units, 1000 pieces: $104.00, $26.00/250
8 Units, 2000 pieces: $192.00, $96.00, $24.00/250
14 Units, 3500 pieces: $308.00, 88.00, $22.00/250
-
44 Caliber .429 220 Grain Flat Point(100 ct.)$24.99 As low as $16.00
44 Caliber .429 220 grain round nose flat point plated bullets manufactured in the USA. We brought these bullets in after a number of calls for a lighter 44 caliber bullet that would run well in 44 magnum but also 44 special. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $18.00 per 100
500 pieces, 5 units in cart: $16.00 per 100
-
Hornady .50 50 Caliber 50 Action Express XTP Jacketed Hollow Point 50101(100 ct.)$64.99 As low as $59.00
Hornady 50 caliber .50 diameter 50 Action Express XTP jacketed hollow point bullets. These projectiles were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities.
Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.For quantity discount on 300 pieces, just put 3 units or more in your cart and pay just $59.00 per 100 pieces delivered!
Learn More -
Northeast 9mm 147 Grain Round Nose(250 count)$37.99 As low as $26.00
9MM .356 147 grain round nose plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discounts are as Follows
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00 per K, $28.00/250
12 Units, 3000 pieces: $312.00, $104.00 per K, $26.00/250
-
Hornady 500 S&W .50 50 Caliber 350 Grain XTP Magnum Jacketed Hollow Point 50100(100 count)$68.99 As low as $64.00
50 Caliber Hornady 350 Grain XTP magnum jacketed hollow points, excellent for 50 Beowulf or 500 S&W Mag. Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
For quantity discount on 300 pieces, put three or more units in your cart and pay just $64.00 per 100 delivered!
-
9MM/357 Sig 125 Grain Jacketed Hollow Point(250 count)$48.99 As low as $34.00
9MM .355 diameter 125 grain jacketed hollow point bullets made in the USA. A hard lead core and a precision drawn copper jacket make these bullets extremely consistent in weight and diameter. These are a very high quality projectile, you cannot compare these to foreign made bullets. While most of our customers are loading these in 9MM, they will also load and function exceptionally well in 357 Sig. They can handle the higher pressure/velocity of 357 Sig but most importantly they have a straight wall profile. This straight wall profile is critical when loading 357 Sig as the bottle neck cartridge requires plenty bearing surface to properly seat the bullet. Traditional profile 9MM projectiles have a slight taper in their shape making it difficult to seat in 357 Sig. We have gotten excellent range reports with regards to accuracy in 9MM with these projectiles out of both carbines and pistols. You can run these at +P velocity and pressure with no issues.
PLEASE NOTE, THESE ARE NOT 357 MAGNUM OR 38 SPECIAL BULLETS, 357 SIG IS A COMPLETELY DIFFERENT CARTRIDGE AND TAKES 9MM DIAMETER BULLETS. THESE ARE NOT THE PROPER DIAMETER FOR 357 MAGNUM OR 38 SPECIAL.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $80.00, $40.00 per 250
4 Units, 1000 pieces: $152.00, $38.00 per 250
8 Units, 2000 pieces: $288.00, $144.00 per K, $36.00 per 250
14 Units, 3500 pieces: $476.00, $136.00 per K, $34.00 per 250
-
45 ACP Small Primer Fired Brass(500 count) FREE TUMBLE CLEANING!$48.99 As low as $38.00
All indoor shot and stored small primer 45 ACP fully sorted to remove large primer pocket and nickel plated brass. It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any large primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
THIS MATERIAL CAN BE DEPRIMED AS A RESULT OF OUR NEW SORTING PROCESS. YOU SHOULD STILL RUN IT THROUGH YOUR NORMAL RESIZING AND DECAPPING PROCESS PRIOR TO LOADING IT.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large. When we first started in 2010, small primer brass accounted for an average of under 5% of the total load. Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed. The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass. Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices Always include shipping!
1000 count, 2 units in cart: $84.00, $42.00/500
1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500
3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500
Learn More -
45 ACP Large Primer Fired Brass(500 count) FREE TUMBLE CLEANING!$48.99 As low as $38.00
All indoor shot and stored large primer 45 ACP, mixed stamp material, fully sorted to remove small primer and nickel plated brass. This is one of our best selling products on the site and for good reason. It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any small primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large. When we first started in 2010, small primer brass accounted for an average of under 5% of the total load. Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed. The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass. Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices Always include shipping!
1000 count, 2 units in cart: $84.00, $42.00/500
1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500
3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500
-
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250