Search results for: '223 5.56 flat brass 500 count free tumble cleaning'
- Did you mean
- 223 5.56 flat brass 500 count free tumbler cleaning
- 223 5.56 flat brass 500 count free tumbled cleaning
- Related search terms
- brass+for+30+carbines+0
- brass+for+30+call+m1+carbine
- brass+of+lead+or+steel+ship
- brass bullets 30 carbine 10mm grain
- 223+5.56+from+brass+500+coat+for+tumble+cleaning
-
45 ACP Large Primer Fired Brass(500 count) FREE TUMBLE CLEANING!$48.99 As low as $38.00
All indoor shot and stored large primer 45 ACP, mixed stamp material, fully sorted to remove small primer and nickel plated brass. This is one of our best selling products on the site and for good reason. It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any small primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large. When we first started in 2010, small primer brass accounted for an average of under 5% of the total load. Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed. The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass. Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices Always include shipping!
1000 count, 2 units in cart: $84.00, $42.00/500
1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500
3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500
-
45 ACP Small Primer Fired Brass(500 count) FREE TUMBLE CLEANING!$48.99 As low as $38.00
All indoor shot and stored small primer 45 ACP fully sorted to remove large primer pocket and nickel plated brass. It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any large primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
THIS MATERIAL CAN BE DEPRIMED AS A RESULT OF OUR NEW SORTING PROCESS. YOU SHOULD STILL RUN IT THROUGH YOUR NORMAL RESIZING AND DECAPPING PROCESS PRIOR TO LOADING IT.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large. When we first started in 2010, small primer brass accounted for an average of under 5% of the total load. Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed. The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass. Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices Always include shipping!
1000 count, 2 units in cart: $84.00, $42.00/500
1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500
3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500
Learn More -
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
-
50 Action Express .500 300 Grain Flat Point(100 ct.)$34.99 As low as $26.00
50 action express .500 300 grain flat point plated bullets manufactured in the USA. These bullets were designed to function especially well in 50 Action express but can be used in other loads that call for a 50 caliber .500 projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
Learn More -
45 Colt 200 Grain Round Nose Flat Point(250 count)$46.99 As low as $32.00
200 grain 45 colt .452 diameter round nose flat point lead cast cowboy bullets perfect for any of your 45 colt loadings. These bullets feature a lubed groove and a crimping groove needed for a proper roll crimp for use in revolvers. Another addition to our product line to compliment our plated bullets, these precision lead cast bullets will give you a cheaper alternative for all day blasting at the range.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $72.00, $36.00 per 250
1000 Count, 4 units in cart: $136.00, $34.00 per 250
2500 Count, 10 units in cart: $128.00 per K, $32.00 per 250
-
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
Northeast 38 Caliber 125 grain Flat Point(250 count)$35.99 As low as $24.00
38 Caliber 125 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $60.00, $30.00/250
4 units, 1000 pieces: $112.00, $28.00/250
8 units, 2000 pieces: $208.00, $104.00 per K, $26.00/250
12 Units, 3000 pieces: $288.00, $96.00/k, $24.00/250
-
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These bullets are incredibly uniform in weight and diameter and are priced right. Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
44 Caliber .429 240 Grain Flat Point(100 ct.)$25.99 As low as $17.00
44 Caliber .429 240 grain round nose flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $19.00 per 100
500 pieces, 5 units in cart: $17.00 per 100
-
Northeast 38 Caliber .357 158 Grain Flat Point(250 count)$40.99 As low as $28.00
38 Caliber .357 158 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
Quantity Discounts as Follows:
Prices include shipping
2 Units, 500 pieces: $68.00, $34.00 per 250
4 units, 1000 pieces: $128.00, $32.00/250
8 units in cart, 2000 count: $240.00, $120.00 per K, $30.00 per 250
12 Units, 3000 pieces: $336.00, $112.00 per K, $28.00 per 250
-
Northeast 41 Caliber 210 Grain Flat Point(100 ct.)$25.99 As low as $17.00
41 Caliber .410 210 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discounts as Follows:
Prices include shipping!
3 Units, 300 pieces: $19.00 per 100
5 Units, 500 pieces: $17.00 per 100
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
45 Caliber .452 200 Grain Flat Point(250 ct.)$45.99 As low as $36.00
45 Caliber .452 200 flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
500 pieces, 2 units in cart: $80.00, $40.00 per 250
2500 pieces, 10 units in cart: $360.00, $144.00 per K, $36.00 per 250
-
32 Caliber 100 Grain Accu Coat Round Nose Flat Point(250 ct.)$32.99 As low as $27.00
32 caliber .313 diameter, 100 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, put two units in your cart(500 ct.) and pay just $54.00 delivered!
Learn More -
45 Long Colt 45 Caliber .452 250 Grain Flat Point(100 ct.)$25.99 As low as $18.00
45 Caliber .452 250 flat point plated bullets manufactured in the USA. These bullets will function well in 45 Long Colt, 454 Casull, or any other cartridge calling for a .452 diameter projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $20.00 per 100
500 pieces, 5 units in cart: $18.00 per 100
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
38 Caliber 125 Grain Accu Coat Round Nose Flat Point(250 ct.)$34.99 As low as $27.00
38 caliber .358 diameter, 125 grain nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For quantity discount, put 4 units(1000 pieces) in cart and pay just $108.00 delivered!
Learn More -
Hornady 500 S&W .50 50 Caliber 350 Grain XTP Magnum Jacketed Hollow Point 50100(100 count)$68.99 As low as $64.00
50 Caliber Hornady 350 Grain XTP magnum jacketed hollow points, excellent for 50 Beowulf or 500 S&W Mag. Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
For quantity discount on 300 pieces, put three or more units in your cart and pay just $64.00 per 100 delivered!
-
45 Caliber .452 185 Grain Flat Point(250 ct.)$44.99 As low as $34.00
45 Caliber .452 185 flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
500 pieces, 2 units in cart: $76.00, $38.00 per 250
2500 pieces, 10 units in cart: $340.00, $136.00 per K, $34.00 per 250
-
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
-
44 Caliber .429 220 Grain Flat Point(100 ct.)$24.99 As low as $16.00
44 Caliber .429 220 grain round nose flat point plated bullets manufactured in the USA. We brought these bullets in after a number of calls for a lighter 44 caliber bullet that would run well in 44 magnum but also 44 special. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $18.00 per 100
500 pieces, 5 units in cart: $16.00 per 100
-
38 Caliber 125 Grain Jacketed Hollow Point(250 count)$48.99 As low as $34.00
Premium 100 % American made .357 diameter 125 grain jacketed hollow points. These bullets are very consistent and feature a copper jacket and a lead core with a cannelure. There is no exposed lead on the rear end of these bullets so they make for a very clean burning option for indoor ranges. These can be used in 38 special or in the higher pressured 357 magnum, they can withstand magnum pressures with no problem. These projectiles will function well in both pistols or lever guns.
Quantity Discount as Follows
Prices Include Shipping!
500 pieces, 2 units in cart: $80.00, $40.00/250
1000 pieces, 4 units in cart: $152.00, $38.00/250
2000 pieces, 8 units in cart: $288.00, $144.00/K, $36.00/250
3000 pieces, 12 units in cart: $408.00, $136.00/K, $34.00/250
For additional information, check out the below link to a very thorough youtube video made by OSO358!
Northeast 38 Caliber 125 Grain JHP Review Video
-
38 Caliber 110 Grain Jacketed Hollow Point(250 count)$43.99 As low as $30.00
Premium 100 % American made .357 diameter 110 grain jacketed hollow points. These bullets are very consistent and feature a copper jacket and a lead core in a hollow point profile. There is no exposed lead on the rear end of these bullets so they make for a very clean burning option for indoor ranges. The hollow point is ideal for target, defense, or a hunting application. These projectiles can be used in 38 special or in the higher pressured 357 magnum, they can withstand magnum pressures with no problem. We are very satisfied with the overall consistency in weight and diameter of these bullets.
Quantity Discount as Follows
Prices Include Shipping!
500 pieces, 2 units in cart: $72.00, $36.00/250
1000 pieces, 4 units in cart: 136.00 per K, $34.00/250
2000 pieces, 8 units in cart: $128.00 per K, $32.00/250
4000 pieces, 16 units in cart: $120.00 per K, $30.00/250
Learn More -
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250