Search results for: '40 s&w'
- Related search terms
- S&w 40 bullets
- S&W 500 mag bullets
- s&w 500 pistol bullets
- S&W 500 mag brass
- S&W+500+mag+brass
-
Hornady XTP 10MM/40 S&W .400 155 Grain Jacketed Hollow Point(100 ct.)$38.99 As low as $29.00
40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue. There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.
Prices include shipping
3 units in cart, 300 pieces: $31.00 per 100
5 units in cart, 500 pieces: $29.00 per 100
Learn More -
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
Hornady 500 S&W .50 50 Caliber 350 Grain XTP Magnum Jacketed Hollow Point 50100(100 count)$68.99 As low as $64.00
50 Caliber Hornady 350 Grain XTP magnum jacketed hollow points, excellent for 50 Beowulf or 500 S&W Mag. Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
For quantity discount on 300 pieces, put three or more units in your cart and pay just $64.00 per 100 delivered!
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
40 SW/10MM 165 Grain Jacketed Hollow Point(250 count)$53.99 As low as $42.00
American made, 40 caliber, jacketed hollow points weighing in at 165 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target or general blasting bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $88.00, $44.00/250
2000 pieces, 8 units: $336.00, $168.00 per K, $42.00/250
Learn More -
40 SW/10MM 180 Grain Jacketed Hollow Point(250 count)$69.99 As low as $56.00
American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target, defense, or general blasting bullet. They are suitable for a defense application as they will expand properly upon contact with soft tissue. These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These bullets are incredibly uniform in weight and diameter and are priced right. Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
-
9MM 147 Grain Jacketed Hollow Point(250 count)$46.99 As low as $34.00
9MM 147 grain .355 diameter jacketed hollow point bullets made in the USA. A hard lead core and a precision drawn copper jacket fully enclosing its lead core make for a clean shooting and accurate projectile. Extremely consistent in weight and diameter these bullets will be perfect for making match grade, high quality ammo. We have sold lots of these bullets to those looking to make their own subsonic ammo for use in suppressors or those wanting a lower recoil load. Whether you are running suppresors or want a low recoil fun round to shoot, these 147's will get the job done. The heavier bullet weight makes for a lower recoil, less snappy round for very fast follow up shots and target acquisition.
Quantity Discount
Prices include shipping!!
500 pieces, 2 units in cart: $76.00, $38.00/250
1000 pieces, 4 units in cart: $144.00, $36.00/250
2500 pieces, 10 units in cart: $340.00, $136.00 per K, $34.00/250