Search results for: 'shipping cost''a=0'A=0'
- Did you mean
- shipping coat a 0 a 0
- shipping colt a 0 a 0
- Related search terms
- shipping cost'a=0'A=0
- shipping cases a 0 a 0
- shipping+cast+a+0
- shipping on overal item international'nvOpzp; AND 1=1 OR (<'">iKO)),
- shipping+countri+a+0
-
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart:Â $29.00 per 100
500 pieces, 5 units in cart:Â $27.00 per 100Â
Â
Learn More -
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
Â
Learn More -
300 Blackout .308 150 Grain Spire Point(100 ct.)$29.99 As low as $21.00
.308 150 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile.  These are the proper weight to make supersonic 300 blackout.  Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart:Â $23.00 per 100
500 pieces, 5 units in cart:Â $21.00 per 100Â
Learn More -
300 Blackout .308 180 Grain Spire Point(100 ct.)$31.99 As low as $24.00
.308 180 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile.  These are the proper weight to make subsonic 300 blackout.  Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart:Â $26.00 per 100
500 pieces, 5 units in cart:Â $24.00 per 100Â
Learn More -
Northeast 300 Blackout .308 220 Grain Spire Point Subsonic(100 ct.)$35.99 As low as $27.00
.308 220 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile.  These are the proper weight to make subsonic 300 blackout.  Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart:Â $29.00 per 100
500 pieces, 5 units in cart:Â $27.00 per 100Â
Learn More -
45 Colt Fired Brass(100 count) FREE TUMBLE CLEANING!$35.99 As low as $22.00
Premium tumble cleaned 45 Colt brass off our indoor shooting ranges ready to ship now! This material has been mechanically sorted 3 times and hand sorted once, it will undergo a final hand sort before packaging to ensure accuracy. Headstamps include but are not limited too Hornady, Federal, Remington, and Winchester. We are tumble cleaning this material and as with all of our brass orders we add an additional 2% to the overall weight so you get your money's worth! Purchase brass from www.nereloading.com knowing it will be clean, properly sorted, and shipped promptly! We give substantial volume discounts on this item, the more you buy, the lower the cost per piece!
Prices include shipping!
3 units in cart, 300 pieces: $26.00 per 100
5 units in cart, 500 pieces: $24.00 per 100
10 units in cart, 1000 pieces: $22.00 per 100
Â
IF THERE IS NO ADD TO CART BUTTON FOR THIS BRASS IT IS OUT OF STOCK. Â CHECK OUT OUR FULLY PROCESSED SAME STAMP 45 COLT BRASS.
CLICK TO SEE SAME STAMP 45 COLT READY TO LOAD BRASS!
Learn More -
44 Magnum Fired Brass(100 count) FREE TUMBLE CLEANING!$35.99 As low as $22.00
Premium tumble cleaned 44 magnum brass off our indoor shooting ranges ready to ship now! This material has been mechanically sorted 3 times and hand sorted once, it will undergo a final hand sort before packaging to ensure accuracy. Headstamps include but are not limited too Federal, Remington, Winchester, and Starline. We are tumble cleaning this material and as with all of our brass orders we add an additional 2% to the overall weight so you get your money's worth! Purchase brass from www.nereloading.com knowing it will be clean, properly sorted, and shipped promptly! We give substantial volume discounts on this item, the more you buy, the lower the cost per piece!
Prices include shipping!
3 units in cart, 300 pieces: $26.00 per 100
5 units in cart, 500 pieces: $24.00 per 100
10 units in cart, 1000 pieces: $22.00 per 100
Â
IF THERE IS NO ADD TO CART BUTTON FOR THIS BRASS IT IS OUT OF STOCK. Â CHECK OUT OUR FULLY PROCESSED SAME STAMP 44 MAGNUM
CLICK TO SEE SAME STAMP 44 MAGNUM READY TO LOAD BRASS!
Â
Learn More -
45 ACP Nickel Plated Law Enforcement Brass Large Primer(500 count) FREE TUMBLE CLEANING!$67.99 As low as $55.00
All large primer, tumble cleaned, 100% Nickel plated 45 ACP brass from our Law enforcement contracted ranges. This brass is perfect for those looking to replicate their own self defense or match grade ammo. Â This brass is given our typical TLC, a tumble cleaning, mechanically sorted 3 times, and hand sorted twice to ensure excellent accuracy. Â As with all brass orders leaving our shop we add an additional 2% to the order so you get your money's worth. Â Purchase this brass with absolute confidence in quality, cleanliness, and accuracy of sort.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently, nickel plated brass has a 50/50 ratio of small to large primer pocket material.  The time it takes to sort this material properly, the way our customers have come to expect, has increased tremendously from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices always include shipping!
1000 pieces, 2 units in cart: $118.00 Per K, $59.00/500
1500 pieces, 3 units in cart: $171.00, $114.00 Per K, $57.00/500
3000 pieces, 6 units in cart: Â $330.00, $110.00 Per K, $55.00/500
Â
Learn More -
Hornady Custom Grade New Dimension 350 Legend 4 Die Set 546401$105.99
Hornady Custom Grade New Dimension 350 Legend 4 Die Set 546401 are the most advanced reloading dies available today. The Zip Spindle design features a series of light threads cut on the spindle and spindle collet. This design eliminates spindle slippage and takes the knuckle busting out of tightening the spindle lock while making spindle adjustments a snap. Â Built-in crimper gives the option of crimping without the need for an extra crimp die. Guaranteed never to break or wear out for from normal use, or they will repair or replace at no cost.
ÂFull Length 4 Die Set Includes:• Full-Length Size Die• Bullet Seating Die• Expander Die with Adjustable Case Mouth• Roll Crimp Die -
Hornady 380 ACP 3 Die Set Taper Crimp 546518$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we
Learn More -
Hornady Custom Grade 40 S&W 10MM Auto 3 Die Set 546533$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.
Hornady part number:Â 546533
UPC #:Â 90255565331
Â
Learn More -
45 ACP Nickel Plated Law Enforcement Brass Small Primer(500 count) FREE TUMBLE CLEANING!$67.99 As low as $55.00
All indoor shot and stored small primer 45 ACP fully sorted to remove large primer pocket and yellow brass.  It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers. Once it is brought to all 45 ACP it is then sorted by hand again to remove any large primer pocket brass. As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth. Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently, nickel plated brass has a 50/50 ratio of small to large primer pocket material.  The time it takes to sort this material properly, the way our customers have come to expect has increased tremendously from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.
Quantity Discount as Follows:
Prices always include shipping!
1000 pieces, 2 units in cart: $118.00 Per K
1500 pieces, 3 units in cart: $171.00, $114.00 Per K, $57.00/500
3000 pieces, 6 units in cart: Â $330.00, $110.00 Per K, $55.00/500
Learn More -
Lee Precision 9MM Carbide Factory Taper Crimp Die 90860$27.99
Carbide, single crimp die.
Learn More -
Lee Precision 45 ACP Carbide Factory Taper Crimp Die 90864$27.99
Carbide, single crimp die.
Learn More -
380 ACP Fired Brass(500 count) FREE TUMBLE CLEANING!$47.99 As low as $36.00
Excellent quality all indoor shot and stored 380 ACP brass from our contracted ranges. Â Like all of our brass it is mechanically sorted 3 times then hand sorted twice to ensure accuracy and quality. Â We are also tumble cleaning the material and adding an additional 2% to the overall weight so you get your moneys worth. Â These steps increase our cost considorably but customer satisfaction with our brass has never been better. Â Buy this brass with absolute confidence in quality and accuracy of sort. Â Our quanity discounts on this item are strong, as always prices include shipping!
Quantity Discount As Follows:
Prices include shipping!
1000 count, 2 units in cart: $80.00, $40.00/500
4000 count, 8 units in cart:$304.00, $76.00 per K, $38.00/500
7000 count, 14 units in cart: $504.00, $72.00 per K, $36.00 per 500
Â
Â
Â
Â
Learn More -
Norma New Brass 223 Remington Shooter Pack (50 per Box) 20257212$53.9950 Pieces per Pack. Learn More
-
Norma New Brass 222 Remington Shooter Pack (50 per Box) 20257117$59.9950 Pieces per Pack. Learn More