Search results for: '260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' OR '1 AND 3154=(SELECT UPPER(XMLType(CHR(6'
- Related search terms
- 260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' or '1''a=0',(;))AND 1
- 260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' OR '1) AND 9813=5691 AND (7670=7670
- 260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' OR '1' AND (SELECT 3974 FROM (SELECT(SLEEP
- 260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' OR '1') AND 7413=(SELECT 7413 FROM PG_SLEE
- 260 gr bulk 451 di hp 45 c a l/site/wp-admin/setup-config.php?step=0'a=0''a=0'[0]'''' OR '1' AND 7413=(SELECT 7413 FROM PG_SLEEP
-
Lee Precision 6.5 Creedmoor Factory Crimp Die 90704$21.99
Steel, single crimp die, does not come with shell holder.
Learn More -
6.5 Creedmoor LARGE PRIMER Same Stamp Processed Brass(100 ct.)$62.99 As low as $52.00
In stock and ready to ship now! 6.5 Creedmoor all same Armscor stamp, large primer pocket, deprimed, sized, and steel pin tumbled this material looks like jewelry. It began life as loaded 6.5 Creedmoor ammunition and was used to test rifles at an indoor range owned by a large firearms manufacturer. The material was picked up and then sold so us as #1 brass and we decided it was the perfect material to process. We have steel pin tumbled, deprimed, and resized this material, it is as close to new brass as you can get! Purchase this brass with absolute confidence in quality and cleanliness!
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: 56.00 per 100
500 count, 5 units in cart: $54.00 per 100
1300 count, 13 units in cart: $52.00 per 100
Â
Â
Learn More -
Lee Precision 45 ACP Carbide Factory Taper Crimp Die 90864$29.99
Carbide, single crimp die.
Learn More -
45 Caliber .452 200 Grain Flat Point(250 ct.)$45.99 As low as $36.00
45 Caliber .452 200 flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
500 pieces, 2 units in cart: $80.00, $40.00 per 250
2500 pieces, 10 units in cart: $360.00, $144.00 per K, $36.00 per 250Â
Â
Â
Â
Â
Learn More -
45 Winchester Magnum Brass(100 ct.)$44.99Excellent quality, all indoor shot and stored 45 Winchester Magnum brass. This material has been mechanically sorted three times and hand sorted twice. We have run in through our tumblers so it is ready for you to decap and resize. As with all brass orders, we add an additional 2% to the overall weight of the order to ensure you get your money's worth. Learn More
-
Nickel 45 Colt Fired Brass(100 count) FREE TUMBLE CLEANING!$59.99
Premium tumble cleaned 45 Colt brass off our indoor shooting ranges ready to ship now! This material has been mechanically sorted 3 times and hand sorted once, it will undergo a final hand sort before packaging to ensure accuracy. Headstamps include but are not limited too Federal, Remington, Winchester, and Hornady. We are tumble cleaning this material and as with all of our brass orders we add an additional 2% to the overall weight so you get your money's worth! Purchase brass from www.nereloading.com knowing it will be clean, properly sorted, and shipped promptly! We give substantial volume discounts on this item, the more you buy, the lower the cost per piece!
Â
Learn More -
Hornady 6.5 Caliber .264 123 Grain Full Metal Jacket Boat Tail 26119(100 count)$37.99 As low as $29.00
6.5 Caliber .264 diameter 123 grain full metal jacket boat tail bullets manufactured by Hornady. These bullets feature Hornady's AMP or advanced manufacturing process technology ensuring concentricity and perfect consistency in jacket thickness. These projectiles will be perfect for any loadings calling for a .264 diameter 6.5 bullet and as always they are priced right.  While these will make great 6.5 Creedmoor loads, we have sold quite a few of them to those looking to load 6.5 Grendel.  As we often say, there is no manufacturer that offers a better balance of quality and reasonable price than Hornady, these bullets are no exception.
Volume Discounts As Follows:
Prices include shipping!!
300 pieces, 3 units in cart: $33.00 Per 100 count
500 pieces, 5 units in cart: $31.00 Per 100 count
1000 pieces, 10 units in cart: $29.00 Per 100 count
Â
Â
Â
Learn More -
Hornady 30 Caliber .308 178 Grain Hollow Point Boat Tail 30715(100 count)$47.99 As low as $41.00
.308 diameter 178 grain hollow point boat tail with Hornady's new AMP(advanced manufacturing process) bullet jackets. These jackets have zero tolerance for concentricity and near zero wall thickness variation for extreme consistency. Â A better balance between quality and price cannot be had with any other manufacturer, Hornady does bulk right!
Quanitity Discount as Follows, Prices include shipping!
300 pieces, 3 units in cart:Â $43.00 per 100
500 pieces, 5 Units in cart: $41.00 per 100
Â
Â
Learn More -
Hornady 6.5 Caliber .264 123 Grain Hollow Point Boat Tail 26174(100 count)$43.99 As low as $35.00
6.5 Caliber .264 diameter 123 grain hollow point boat tail bullets manufactured by Hornady. These bullets feature Hornady's AMP or advanced manufacturing process technology ensuring concentricity and perfect consistency in jacket thickness. These projectiles will be perfect for any loadings calling for a .264 diameter 6.5 bullet and as always they are priced right. Â While these will make great 6.5 Creedmoor loads, we have sold quite a few of them to those looking to load 6.5 Grendel. Â As we often say, there is no manufacturer that offers a better balance of quality and reasonable price than Hornady, these bullets are no exception.
Volume Discounts As Follows:
Prices include shipping!!
300 pieces, 3 units in cart: $39.00 per 100
500 pieces, 5 units in cart: $37.00 per 100
1000 pieces, 10 units in cart: $35.00 per 100
Â
Â
Â
Learn More -
Hornady 6.5 PRC 2 Die Set 546281$53.99
Hornady 6.5 PRC 2 Die Set 546281 for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
45-70 Government HORNADY STAMP ONLY Fired Brass(50 Count)$54.99
All Indoor shot and stored Hornady Stamp only 45-70 Government brass. This material has been mechanically sorted three times and hand sorted twice. We have polished the material so it is ready for for you to begin processing immediately.
We sort this stamp out since hornady cuts its brass shorter to accomodate their longer ogive FTX Flex tip bullet. Â According to Hornady volume 10, 2.04" is the required trim length for their brass to accomodate the Hornady 250 grain monoflex and the 325 grain FTX projectile due to longer Ogive.
THIS BRASS IS SHORTER THAN REGULAR 45-70, YOU MUST BE CERTAIN YOU CAN LOAD IT PRIOR TO PURCHASING IT, YOU MUST DO YOUR RESEARCH.
Learn More -
Hornady .458 300 Grain Hollow Point 4500(100 count)$51.99 As low as $42.00
.458 diameter hollow points manufactured by Hornady, perfect for 45-70 Government, 458 Socom, or any other load calling for a .458 diameter projectile. Â These bullets feature a precision drawn copper jacket and traditional serated cannelure for a strong crimping foundation to hold these bullets in place once loaded. Â These will make wonderful self defense, hunting, or paper punching bullet!
We acquired a decent sized lot of these bullets on a buyout from a company that went out of business, this is very competitive pricing on this item. Â Once we are out of them, that is it, there is no more to be had at these prices. Â
Quantity Discount as Follows:
300 pieces, 3 units in cart: $46.00 per 100 pieces
500 pieces, 5 units in cart: $44.00 per 100 pieces
1000 pieces, 10 units in cart: $42.00 per 100 pieces
Â
Learn More -
5.7 x 28MM Fired Brass (250 count)$35.99 As low as $21.00
All indoor shot and stored 5.7 X 28MM fired brass. This material is very clean, we do not polish it in order to preserve the factory coating that ensures reliable function. We have started to accumulate enough of this brass to warrant making a product on the site for our customers. As with all of our brass orders we add an additional 2% to the weight of the order to ensure you get your money's worth. Â
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $54.00, $27.00 per 250
1000 count, 4 units in cart: $100.00, $25.00 per 250
2000 count, 8 units in cart: $184.00, $92.00 per K, $23.00/250
6000 count, 24 units in cart: $504.00, $84.00 per K, $21.00/250
Â
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads.  These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM.  These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms. Â
Quantity discount as follows:
Prices include shippingÂ
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA.  These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom.  Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling.  Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.Â
After years of trying a number of plated bullet companies, we have found these to be superior to all others. Â These are not a foreign made, sub par product commonly peddled online. Â The consistency in weight and diameter along with a thick plating make these truly superior to others. Â We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
Â
Learn More -
Hornady 30 Caliber .308 155 Grain Hollow Point Boat Tail(100 count)$49.99 As low as $34.00
.308 diameter 155 grain hollow point boat tail with Hornady's AMP(advanced manufacturing process) bullet jackets. These jackets have zero tolerance for concentricity and near zero wall thickness variation. Â These projectiles will function well in any load calling for a .308 diameter bullet. Â Customers have reported excellent results in .308 Winchester, 30-06 Springfield, and 300 Win Mag loadings. Â As we often say about Hornady bulk bullets, a better value you will not find. Â They offer the best balance of quality to price which is why they are a customer favorite. Â
Â
Quantity Discount as follows:
5 units, 500 pieces: $190.00 or $38.00/100 ct.
10 units, 1000 pieces: $360.00 or $36.00/100 ct.
25 units, 2500 pieces: $850.00 or $34.00/100 ct.
Â
Â
Â
Learn More -
Hornady 6.5 Grendel 2 Die Set 546291$55.99
New Dimension I Two-Die Rifle Set 6.5 Grendel 546291 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More