Search results for: 'reloading di small reloading do ship'
- Related search terms
- Reloading 380 bullet'nvOpzp; AND 1=1 OR (<'">iKO)),
- ship 100 grain 250 can grain set
- ship 100 grain grain set bullets 224 diameter 6.5
- ship 100 grain grain set bullets 220 diameter 65
- ship 100 grain grain set bullets 2270 diameter 65
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
Hornady 6MM 108 Grain Polymer Tip ELD Match(100 count)$53.99 As low as $41.00
6MM .243 108 Grain ELD Polymer tipped match bullets manufactured by Hornady. These projectiles feature Hornady's AMP jacket design for perfect concentricity and consistency. The ELD line is known for its heat resistant plastic which prevents deformation of the polymer tip in long range flight. These bullets will do exceptionally well for any loads calling for a 6MM .243 diameter bullet.
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $45.00
500 count, 5 units in cart: $43.00 per 100
1000 count, 10 units in cart: $41.00 per 100
Learn More -
30 Caliber .308 220 Grain Hollow Point Boat Tail WITH CANNELURE(100 count)$51.99 As low as $43.00
American made, .308 diameter 220 grain hollow point boat tail bullet with a cannelure. These jackets have zero tolerance for concentricity and near zero wall thickness variation for extreme consistency. These bullets will do extremely well in subsonic 300 AAC, a heavy 308, 30-06, 300 Win Mag, or any other load that calls for a heavier .308 bullet. These are incredible projectiles and are priced right.
Quanitity Discount as Follows:
Prices include shipping!
3 units, 300 pieces: $45.00 per 100
5 units, 500 pieces: $43.00 per 100
-
Hornady 9MM 3 Die Set Taper Crimp 546516$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we
Learn More -
222 Remington Fired Brass(100 ct.)$49.99
All indoor shot and stored 222 Remington brass ready to ship now! This material is in excellent shape, it has been mechanically sorted three times and hand sorted twice. We have run it through our polisher so it is ready for your dies!
Learn More -
Hornady 380 ACP 3 Die Set Taper Crimp 546518$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we
Learn More -
Hornady Custom Grade 40 S&W 10MM Auto 3 Die Set 546533$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.
Hornady part number: 546533
UPC #: 90255565331
-
Hornady .308 125 Grain Full Metal Jacket(100 count)$42.99 As low as $29.00
.308 diameter 125 grain full metal jacket bullets manufactured by Hornady. We have been getting lots of emails about 300 blackout bullets that can be run at supersonic speeds and we finally got these in. These projectiles feature a precision drawn copper jacket with an all lead core, they are indoor range safe as they will not draw a magnet. These will do very well in 300 Blackout but will also make great plinking light loads for 308 winchester or 3006 Springfield.
Volume discount as follows:
Prices include Shipping!
300 count, 3 units in cart: $33.00 per 100
500 count, 5 units in cart: $31.00 per 100
1000 count, 10 units in cart: $29.00 per 100
-
5.7 x 28MM Fired Brass (250 count)$35.99 As low as $21.00
All indoor shot and stored 5.7 X 28MM fired brass. This material is very clean, we do not polish it in order to preserve the factory coating that ensures reliable function. We have started to accumulate enough of this brass to warrant making a product on the site for our customers. As with all of our brass orders we add an additional 2% to the weight of the order to ensure you get your money's worth.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $54.00, $27.00 per 250
1000 count, 4 units in cart: $100.00, $25.00 per 250
2000 count, 8 units in cart: $184.00, $92.00 per K, $23.00/250
6000 count, 24 units in cart: $504.00, $84.00 per K, $21.00/250
-
7.62 X 54R Fired Brass(100 Count) **FREE TUMBLE CLEANING**$59.99
Excellent quality 7.62 X 54R brass in stock and ready to ship now! This brass has been mechanically sorted three times and hand sorted twice. We have also added the step of looking inside every case to make sure there are no berdan cases(2 hole, non reloadable). PPU and S&B stamps will dominate this material. It was very clean to begin with but we have still run it through our tumblers!
-
Hornady 6.5 PRC 2 Die Set 546281$53.99
Hornady 6.5 PRC 2 Die Set 546281 for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
Hornady 38 Caliber 125 Grain XTP Jacketed Hollow Point 35710(100 count)$31.99 As low as $24.00
38 Caliber, .357 diameter 125 Grain Jacketed Hollow Point XTP defense bullets from Hornady. These projectiles will do well in any 38 special or 357 magnum loadings. A precision drawn copper jacket bonded to its lead core, these bullets are known for excellent controlled expansion and weight retention. These bullets make a wonderful defense, hunting, or blasting bullet. The XTP is known for its ability to expand and deliver massive destruction making it a rock solid choice for self defense.
Volume Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $26.00 per 100
500 pieces, 5 units in cart: $24.00 per 100
Learn More -
Hornady 270 Winchester 2 Die Set 546300$55.99
New Dimension I Two-Die Rifle Set 270 Winchester 546300 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
Hornady .223 Remington 2 Die Set 546228$55.99
New Dimension I Two-Die Rifle Set .223 Remington 546228 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
45-70 Government HORNADY STAMP ONLY Fired Brass(50 Count)$54.99
All Indoor shot and stored Hornady Stamp only 45-70 Government brass. This material has been mechanically sorted three times and hand sorted twice. We have polished the material so it is ready for for you to begin processing immediately.
We sort this stamp out since hornady cuts its brass shorter to accomodate their longer ogive FTX Flex tip bullet. According to Hornady volume 10, 2.04" is the required trim length for their brass to accomodate the Hornady 250 grain monoflex and the 325 grain FTX projectile due to longer Ogive.
THIS BRASS IS SHORTER THAN REGULAR 45-70, YOU MUST BE CERTAIN YOU CAN LOAD IT PRIOR TO PURCHASING IT, YOU MUST DO YOUR RESEARCH.
Learn More