Search results for: '.45 caliber bullets in bulk'
- Did you mean
- 45 caliber bullets in burr
- 45 caliber bullets in built
- Related search terms
- bullets for reloading 44 mag"and/**/extractvalue(1,concat(char(126),md5(1459640184)))and"
- Bullets+for+reloading+40'/**/and/**/DBMS_PIPE.RECEIVE_MESSAGE('o',7)='o
- bullets for reloading 40'and/**/convert(int,sys.fn_sqlvarbasetostr(hashbytes('md5','1331748766')))>'0
- bullets for reloading 40"and"o"="o
- bullets for reloading 40/**/and/**/cast(md5('1850948590')as/**/int)>0,nereloading.com/catalogsearch/result/index?q,nereloading.c
-
Hornady 270 Caliber .277 130 Grain Soft Point Interlock 2730(100 ct.)$40.99 As low as $33.00
270 Caliber .277 diameter Hornady 130 grain soft point flat base interlock bullets. The projectiles are a spire point profile, a flat base pointed projectile. The InterLock is designed to be a devastating hunting bullet. The InterLock Ring ensures that the core and jacket remain locked during expansion. The InterLock retains more mass, energy, and momentum after impact and transfers that energy to the target. These will make a wonderful hunting load in 270 winchester, 270 Weatherby, or any other cartridge that calls for a .277 diameter projectile.
Quantity Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $35.00 per 100
500 pieces, 5 units in cart: $33.00 per 100
Learn More -
Hornady 270 Caliber .277 140 Grain Boat Tail Soft Point Interlock 2735(100 ct.)$41.99 As low as $34.00
270 Caliber .277 diameter Hornady 140 grain boat tail soft point interlock bullets. The InterLock is designed to be a devastating hunting bullet. The InterLock Ring ensures that the core and jacket remain locked during expansion. The InterLock retains more mass, energy, and momentum after impact and transfers that energy to the target. These will make a wonderful hunting load in 270 winchester, 270 Weatherby, or any other cartridge that calls for a .277 diameter projectile.
Quantity Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $36.00 per 100
500 pieces, 5 units in cart: $34.00 per 100
Learn More -
38 Caliber 110 Grain Jacketed Hollow Point(250 count)$43.99 As low as $30.00
Premium 100 % American made .357 diameter 110 grain jacketed hollow points. These bullets are very consistent and feature a copper jacket and a lead core in a hollow point profile. There is no exposed lead on the rear end of these bullets so they make for a very clean burning option for indoor ranges. The hollow point is ideal for target, defense, or a hunting application. These projectiles can be used in 38 special or in the higher pressured 357 magnum, they can withstand magnum pressures with no problem. We are very satisfied with the overall consistency in weight and diameter of these bullets.
Quantity Discount as Follows
Prices Include Shipping!
500 pieces, 2 units in cart: $72.00, $36.00/250
1000 pieces, 4 units in cart: 136.00 per K, $34.00/250
2000 pieces, 8 units in cart: $128.00 per K, $32.00/250
4000 pieces, 16 units in cart: $120.00 per K, $30.00/250
Learn More -
Nickel 45 Colt Fired Brass(100 count) FREE TUMBLE CLEANING!$59.99
Premium tumble cleaned 45 Colt brass off our indoor shooting ranges ready to ship now! This material has been mechanically sorted 3 times and hand sorted once, it will undergo a final hand sort before packaging to ensure accuracy. Headstamps include but are not limited too Federal, Remington, Winchester, and Hornady. We are tumble cleaning this material and as with all of our brass orders we add an additional 2% to the overall weight so you get your money's worth! Purchase brass from www.nereloading.com knowing it will be clean, properly sorted, and shipped promptly! We give substantial volume discounts on this item, the more you buy, the lower the cost per piece!
-
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
Hornady .458 300 Grain Hollow Point 4500(100 count)$51.99 As low as $42.00
.458 diameter hollow points manufactured by Hornady, perfect for 45-70 Government, 458 Socom, or any other load calling for a .458 diameter projectile. These bullets feature a precision drawn copper jacket and traditional serated cannelure for a strong crimping foundation to hold these bullets in place once loaded. These will make wonderful self defense, hunting, or paper punching bullet!
We acquired a decent sized lot of these bullets on a buyout from a company that went out of business, this is very competitive pricing on this item. Once we are out of them, that is it, there is no more to be had at these prices.
Quantity Discount as Follows:
300 pieces, 3 units in cart: $46.00 per 100 pieces
500 pieces, 5 units in cart: $44.00 per 100 pieces
1000 pieces, 10 units in cart: $42.00 per 100 pieces
-
40 SW/10MM 165 Grain Jacketed Hollow Point(250 count)$53.99 As low as $42.00
American made, 40 caliber, jacketed hollow points weighing in at 165 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target or general blasting bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $88.00, $44.00/250
2000 pieces, 8 units: $336.00, $168.00 per K, $42.00/250
Learn More -
Northeast .308 150 Grain Boat Tail Soft Point(100 count)$39.99 As low as $32.00
.308 diameter 150 grain soft point boat tail bullets perfect for paper punching or hunting. These bullets feature a core that is bonded to its jacket which will aid in deep & controlled expansion. We were excited to get these in as we had a number of requests for a boat tail hunting bullet in .308 diameter. These projectiles will run in bolt guns or semi auto rifles in any chambering that calls for a .308 diameter bullet.
Quantity Discounts As Follows:
Prices include shipping!
300 count, 3 units in cart: $34.00/100
500 count, 5 units in cart: $32.00/100
-
Hornady .223/5.56 .224 60 Grain Spire Point With Cannelure 2270(250 ct.)$45.99 As low as $35.00
Hornady's Spire point have a streamlined design for ultra flat trajectories. Match grade jacket design provides maximum accuracy at all ranges and have explosive expansion, even at low velocities. These projectiles will do well in .223 Remington, 5.56 Nato, 22-250, or any other cartridge calling for a 22 caliber .224 diameter projectile with a cannelure.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $82.00, $41.00/250
1000 pieces, 4 units in cart: $156.00, $39.00/250
2000 pieces, 8 units in cart: $148.00 per K, $37.00/250
7500 pieces, 30 units in cart: $140.00 per K, $35.00/250
-
Hornady 55 Grain Soft Point Boat Tail with Cannelure (250 count)$41.99 As low as $27.00
55 Grain Full metal jacket soft point boat tail bullets with a cannelure for loading .223 Remington, 5.56 Nato, or any other cartridge that calls for a .224 diameter projectile. These projectiles feature a precision drawn copper jacket, a serrated cannelure, and an exposed lead tip which aids in fragmentation upon contact. These bullets make a wonderful target, hunting, or defense load without breaking the bank.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
40 SW/10MM 180 Grain Jacketed Hollow Point(250 count)$69.99 As low as $56.00
American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target, defense, or general blasting bullet. They are suitable for a defense application as they will expand properly upon contact with soft tissue. These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
Hornady .223/5.56 55 Grain Full Metal Jacket Boat Tail(250 Count)$41.99 As low as $27.00
.224 diameter, 55 grain Full Metal Jacket boat tail bullets with a serrated cannelure manufactured in the USA by Hornady. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
Hornady 62 Grain FMJ BT .223/5.56 Projectiles (250 Count)$46.99 As low as $34.00
Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure. These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them. They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady. They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer. Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $80.00, $40.00/250
1000 pieces, 4 units in cart: $152.00, $38.00/250
2000 pieces, 8 units in cart: $144.00 per K, $36.00/250
7500 pieces, 30 units in cart: $136.00 per K, $34.00/250
-
Nato .223/5.56 62 Grain Full Metal Jacket Boat Tail(250 Count)
.223 Remington/5.56 Nato 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure manufactured in the USA. These projectiles feature a copper drawn jacket, a serrated cannelure, and an all lead core so they will not draw a magnet. Thesy are an excellent economy blasting bullet. These are not a match grade bullet, they are rock solid for the money and will run well. We have had great results loading them for AR platforms to shoot steel targets at 100 and 200 yards with iron sights. For our high volume shoots, these and the 55 Grain Nato bullets are the ones we use. They function well and are priced aggressively.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $56.00, $28.00/250
1000 pieces, 4 units in cart: $104.00, $26.00/250
2000 pieces, 8 units in cart: $96.00 per K, $24.00/250
7500 pieces, 30 units in cart: $88.00 per K, $22.00/250
-
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
-
Hornady 6MM .243 58 Grain V-Max 24114(250 ct.)$55.99 As low as $47.00
Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and helps to stabilize the bullet in flight. It also acts as a wedge, initiating bullet expansion.
The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles.Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $102.00, $51.00 per 250
1000 Count, 4 units in cart: $196.00, $49.00 per 250
2500 Count, 10 units in cart: $470.00, $47.00 per 250
Learn More -
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
Northeast 9mm 115 Grain Round Nose(250 count)$32.99 As low as $21.00
9MM 115 grain .356 diameter round nose plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discounts as Follows:
Prices include shipping!
2 Units, 500 pieces: $54.00, $27.00/250
4 Units, 1000 pieces: $100.00, $25.00/250
8 Units, 2000 pieces: $184.00, $92.00, $23.00/250
16 units, 4000 pieces: $336.00, $84.00/K, $21.00/250 -
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
-
Northeast 9mm 124 Grain Round Nose (250 count)$33.99 As low as $22.00
9MM .356 124 grain round nose plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discounts as Follows:
2 Units, 500 pieces: $56.00, $28.00/250
4 Units, 1000 pieces: $104.00, $26.00/250
8 Units, 2000 pieces: $192.00, $96.00, $24.00/250
14 Units, 3500 pieces: $308.00, 88.00, $22.00/250
-
357 Magnum Nickel Plated Brass(250 count) FREE TUMBLE CLEANING!$54.99
All indoor shot and stored 357 magnum nickel plated fired brass, tumble cleaned and fully sorted to remove any yellow brass. As we have mentioned on other product pages regarding our brass, this material is 3 times sorted mechanically and 2 times sorted by hand to remove any damages, lives, or foreign calibers. The key component to our sorting process when dealing with either 38 special or 357 magnum is having a machine in house that sorts by height. The accuracy of our 357 magnum sort is exceptional due to the fact that we are able to sort not only by case diameter but also by height. We are tumble cleaning this material to a nice shine and as with all of our brass we are adding 2% to the overall wieght of the order to ensure you get your money's worth. The headstamps in this brass include but are not limited to Remington, Federal, Speer, and Winchester. You can purchase this brass with absolute confidence in overall quality, accuracy of sort, and cleanliness.
As with our 45-70 Government brass, we remove the Hornady headstamps. Hornady stamps in Nickel 357 magnum are usually loaded with their FTX bullet, to accomodate the longer bullet, Hornady nickel brass is much shorter than the usual 357 magnum. Most people are not setup to load this short brass so we now remove it. We are stock piling this hornady 357 magnum brass, if you are able to load it and would like to purchase it, just email us. See the email address on the top of this page in the blue margin.