Search results for: '100 grain 30 caliber'
- Did you mean
- 1030 grain 30 caliber
- Related search terms
- 1000+count,+4+units+in+cart:+$208.00($52.00/250+count)'
- 1000 count, 4 units in cart: $208.00($52.00/250 count)''nvOpzp; AND 1=1 OR (<'">iKO)),
- 100+grain+40+smith+and+wesson+hollow+pin
- 1000+grain+40+smith+and+wesson+hollow+pin
- 1000+count,+4+units+in+cart:+$208.00($52.00/250+count)'A=0
-
300 Blackout .308 150 Grain Spire Point(100 ct.)$29.99 As low as $21.00
.308 150 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make supersonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $23.00 per 100
500 pieces, 5 units in cart: $21.00 per 100
Learn More -
300 Blackout .308 180 Grain Spire Point(100 ct.)$31.99 As low as $24.00
.308 180 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $26.00 per 100
500 pieces, 5 units in cart: $24.00 per 100
Learn More -
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
Northeast 300 Blackout .308 220 Grain Spire Point Subsonic(100 ct.)$35.99 As low as $27.00
.308 220 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
Learn More -
Hornady 6MM .243 58 Grain V-Max 24114(250 ct.)$55.99 As low as $47.00
Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and helps to stabilize the bullet in flight. It also acts as a wedge, initiating bullet expansion.
The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles.Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $102.00, $51.00 per 250
1000 Count, 4 units in cart: $196.00, $49.00 per 250
2500 Count, 10 units in cart: $470.00, $47.00 per 250
Learn More -
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
Hornady 62 Grain FMJ BT .223/5.56 Projectiles (250 Count)$46.99 As low as $34.00
Hornady's 62 grain Full Metal Jacket boat tail, .224 diameter, with cannelure. These are a popular choice among those that want a 62 grain projectile that does not draw a magnet, these projectils do not have any steel in them. They feature a copper drawn jacket and an all lead core, they are what you would expect in terms of quality from Hornady. They are very consistent and well made, a better balance of quality and price cannot be found with any other manufacturer. Anyone looking for a heavier bullet that doesn't carry the higher hollow point boat tail price, look no further.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $80.00, $40.00/250
1000 pieces, 4 units in cart: $152.00, $38.00/250
2000 pieces, 8 units in cart: $144.00 per K, $36.00/250
7500 pieces, 30 units in cart: $136.00 per K, $34.00/250
-
Lee Precision 30-30 Winchester Factory Crimp Die 90882$21.99
Steel, single crimp die, does not come with shell holder.
Learn More -
30 Carbine Deprimed Ready to Load Brass(250 ct.)$79.99 As low as $71.00
In stock and ready to ship now! 30 Carbine, all same SL stamp, deprimed, sized, and steel pin tumbled this material looks like jewelry. It began life as loaded 30 M1 carbine and was shot to test rifles at an indoor range owned by a large firearms manufacturer. The material was picked up and then sold to us as #1 brass and we decided it was the perfect material to process. We have steel pin tumbled, deprimed, and resized this material, it is as close to new brass as you can get! Purchase this material with absolute confidence in quality and cleanliness.
Quantity Discount As Follows:
2 units in cart, 500 count: $150.00, $75.00 per 250 ct.
4 units in cart, 1000 count: $292.00, $73.00 per 250 ct.
12 units in cart, 3000 count: $852.00, $284.00 per k($71.00/250 ct.)
Learn More -
Hornady Custom Grade 30 M1 Carbine 3 Die Set 546503$69.99
Hornady Custom Grade 30 M1 Carbine 3 Die Set 546503 represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment, and smooth functioning. With one of the finest internal finishes in the industry, Hornady Custom Grade and Match Grade Dies provide a lifetime of reloading. They're so well crafted that they're guaranteed never to break or wear out from normal use.
Includes:
- Full length sizer die with titanium sizer ring (does not require case lubrication)
- Seating die
- Expander die
-
Hornady 6MM 108 Grain Polymer Tip ELD Match(100 count)$53.99 As low as $41.00
6MM .243 108 Grain ELD Polymer tipped match bullets manufactured by Hornady. These projectiles feature Hornady's AMP jacket design for perfect concentricity and consistency. The ELD line is known for its heat resistant plastic which prevents deformation of the polymer tip in long range flight. These bullets will do exceptionally well for any loads calling for a 6MM .243 diameter bullet.
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $45.00
500 count, 5 units in cart: $43.00 per 100
1000 count, 10 units in cart: $41.00 per 100
Learn More -
Hornady .308 125 Grain Full Metal Jacket(100 count)$42.99 As low as $29.00
.308 diameter 125 grain full metal jacket bullets manufactured by Hornady. We have been getting lots of emails about 300 blackout bullets that can be run at supersonic speeds and we finally got these in. These projectiles feature a precision drawn copper jacket with an all lead core, they are indoor range safe as they will not draw a magnet. These will do very well in 300 Blackout but will also make great plinking light loads for 308 winchester or 3006 Springfield.
Volume discount as follows:
Prices include Shipping!
300 count, 3 units in cart: $33.00 per 100
500 count, 5 units in cart: $31.00 per 100
1000 count, 10 units in cart: $29.00 per 100
-
Hornady 30-06 Springfield 2 Die Set 546340$55.99
New Dimension I Two-Die Rifle Set 30-06 Springfield 546340 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
Northeast Premium 45 ACP 230 Grain Jacketed Hollow Point PL(100 count)$33.99 As low as $18.00
45 ACP .451 diameter 230 Grain Jacketed Hollow Point bullets made in the USA. These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile. They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges. The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue. These bullets will expand, pedals will form, and they will mushroom making them suitable in a hunting or self defense application. Whether you are a target shooter or plan on using these bullets for hunting or self defense this is tough price point to beat for such a versatile do it all projectile.
Volume Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $24.00/100
500 pieces, 5 units in cart: $22.00/100
1000 pieces, 10 units in cart: $20.00/100
2000 pieces, 20 units in cart: $18.00/100
Learn More -
Hornady 380 ACP .355 90 Grain XTP Jacketed Hollow Point 35500(100 ct.)$29.99 As low as $22.00
380 ACP .355 diameter 90 Grain Jacketed Hollow Point XTP defense bullets from Hornady. A precision drawn copper jacket, bonded to its lead core, with striations in the jacket allow these projectiles to form petals, expand, and retain mass upon entering soft tissue. The massive increase in surface area as this projectile mushrooms, transfers energy to the intended target for a massive cavitational wound and stopping power.
Quantity Discount as follows:
Prices include shipping!
300 pieces, 3 units in cart: $24.00 per 100
500 pieces, 5 units in cart: $22.00 per 100
Learn More -
Hornady .458 300 Grain Hollow Point 4500(100 count)$51.99 As low as $42.00
.458 diameter hollow points manufactured by Hornady, perfect for 45-70 Government, 458 Socom, or any other load calling for a .458 diameter projectile. These bullets feature a precision drawn copper jacket and traditional serated cannelure for a strong crimping foundation to hold these bullets in place once loaded. These will make wonderful self defense, hunting, or paper punching bullet!
We acquired a decent sized lot of these bullets on a buyout from a company that went out of business, this is very competitive pricing on this item. Once we are out of them, that is it, there is no more to be had at these prices.
Quantity Discount as Follows:
300 pieces, 3 units in cart: $46.00 per 100 pieces
500 pieces, 5 units in cart: $44.00 per 100 pieces
1000 pieces, 10 units in cart: $42.00 per 100 pieces
-
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
Lee Precision 30 M1 Carbine Factory Crimp Die 90421$21.99
Steel, single crimp die, does not come with shell holder.
Learn More -
45-70 Government .459 405 Grain Flat Point Lead Cast(100 ct.)$41.99
.459 diameter 405 grain flat point lead cast 45-70 Government bullets. These projectiles feature a beveled base, have been lubed, and are made with a 92/6/2 lead mix giving them a hardness of 16-17 brinell. This lead mix is the most desirable mix and is absolutely necessary for rifle projectiles.
Learn More -
Lee Pacesetter 30-06 Springfield 3 Die Set 90508$45.99
3 Die Set, Hardened steel, includes a sizer die, seating die, factory crimp die, shell holder, load data, and a powder dipper.
Learn More -
Lee Precision 30-06 Springfield Factory Crimp Die 90842$21.99
Steel, single crimp die, does not come with shell holder.
Learn More -
40 SW/10MM 165 Grain Jacketed Hollow Point(250 count)$53.99 As low as $42.00
American made, 40 caliber, jacketed hollow points weighing in at 165 Grains, perfect for any of your 10MM or 40 smith and wesson loads. They feature a precision drawn copper jacket fully enclosing its base leaving no exposed lead for a very clean shooting and accurate projectile. These bullets make a wonderful target or general blasting bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $88.00, $44.00/250
2000 pieces, 8 units: $336.00, $168.00 per K, $42.00/250
Learn More