Search results for: '300'
- Did you mean
- 3060
- Related search terms
- 300 blackout 250 grain norma enabl
- 300 blackout 250 grain new enabl
- 300 blackout 250 grain nato enabl
- 300 blackout 250 grain none enabl
- 300 blackout 250 grain no enabl
-
45 Long Colt 45 Caliber .452 250 Grain Flat Point(100 ct.)$25.99 As low as $18.00
45 Caliber .452 250 flat point plated bullets manufactured in the USA. These bullets will function well in 45 Long Colt, 454 Casull, or any other cartridge calling for a .452 diameter projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $20.00 per 100
500 pieces, 5 units in cart: $18.00 per 100
-
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
-
30-06 Springfield Fired Brass(100 count) FREE TUMBLE CLEANING!$34.99 As low as $26.00
All indoor shot and stored 30-06 Springfield brass tumble cleaned and ready to ship now. We began offering this material in response to customers wanting a cheaper alternative to our same stamp 30-06 Springfield brass. Expect military crimped brass and some non crimped primer pockets. This brass has been mechanically sorted 3 times and hand sorted 2 times before shipping. As with all of our brass orders we add an additional 2% to the overall weight to ensure you get your money's worth. A pen light is used to check every piece to make sure no berdan primed cases are present(2 hole non reloadable cases). Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.
WE OFFER THIS MIXED STAMP MATERIAL FOR THOSE THAT ARE JUST LOOKING FOR THE CHEAPEST 30-06 BRASS FOR PLINKING AND FUN AT THE RANGE. IF YOU PREFER ALL SAME STAMP BRASS, YOU CAN CHECKOUT OUR "SAME STAMP 30-06 BRASS PAGE" BY CLICKING THIS BLUE FONT
Quantity Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $30.00 Per 100
500 count, 2 units in cart: $28.00 Per 100
1000 count, 10 units in cart: $26.00 Per 100
-
PMC .308 Winchester Same Stamp Processed Brass(100 count)$41.99 As low as $30.00
In stock and ready to ship now! This material began its life as loaded PMC .308 Winchester ammunition and was used to test rifles at an indoor range owned by a large firearms manufacturer. The material was picked up and sold to us as #1 brass and we decided it was the perfect material to process. It is all PMC .308 Winchester brass, fully reconditioned to SAAMI .308 Winchester Specification. This brass is ready to load, it has been trimmed to length, sized, deprimed, and washed. You can now save tons of time by cutting out the worst part of making your own ammo. Great care has gone into processing this material, we know you will absolutely love it. Get all the benefits of new brass at a fraction of the cost, spend more time shooting and less time behind the bench trimming and swaging primer pockets. With this brass all you need to do is prime, charge powder, seat a bullet, crimp, and Blast away!
Prices include shipping!
Volume Discounts As Follows:
300 count, 3 units in cart: $34.00 per 100
500 count, 5 units in cart: $32.00 per 100
1300 count, 13 units in cart: $30.00 per 100
-
44 Caliber .429 220 Grain Flat Point(100 ct.)$24.99 As low as $16.00
44 Caliber .429 220 grain round nose flat point plated bullets manufactured in the USA. We brought these bullets in after a number of calls for a lighter 44 caliber bullet that would run well in 44 magnum but also 44 special. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $18.00 per 100
500 pieces, 5 units in cart: $16.00 per 100
-
Hornady 500 S&W .50 50 Caliber 350 Grain XTP Magnum Jacketed Hollow Point 50100(100 count)$68.99 As low as $64.00
50 Caliber Hornady 350 Grain XTP magnum jacketed hollow points, excellent for 50 Beowulf or 500 S&W Mag. Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
For quantity discount on 300 pieces, put three or more units in your cart and pay just $64.00 per 100 delivered!
-
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
-
30-30 Winchester .308 150 Grain Flat Point(100 ct.)$22.99 As low as $14.00
30-30 Winchester .308 150 Grain flat point plated bullets manufactured in the USA. These bullets were designed to function especially well in 30-30 Winchester but can also be used in any other lower pressure loads calling for a .308 projectile. The flat point profile on these projectiles make them safe to use in tube fed lever guns. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $16.00 per 100
500 pieces, 5 units in cart: $14.00 per 100
Learn More -
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100