Search results for: '9mm+Caliber+124+Grain+FMJ+hollow+point'
- Did you mean
- 9mm caliber 12 grain fmj hollow point
-
38 Caliber 158 Grain Semi Wadcutter(250 count)$45.99 As low as $30.00
38 Caliber 158 grain semi wadcutters perfect for your paper punching loads. These are great bullets for guys/gals wanting a cheap blasting bullet that still performs well. These bullets feature a double lubed groove and were precision swaged for consistent diameter. We have had lots of requests for a bullet that makes good quality ammo but is cheaper than plated or jacketed, these bullets meet this need.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $72.00, $36.00/250
1000 count, 4 units in cart: $136.00 per K, $34.00/250
2000 count, 8 units in cart: $128.00 per K, $32.00/250
3000 count, 12 units in cart: $120.00 per K, $30.00/250
-
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These bullets are incredibly uniform in weight and diameter and are priced right. Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
Hornady 55 Grain Soft Point Boat Tail with Cannelure (250 count)$41.99 As low as $27.00
55 Grain Full metal jacket soft point boat tail bullets with a cannelure for loading .223 Remington, 5.56 Nato, or any other cartridge that calls for a .224 diameter projectile. These projectiles feature a precision drawn copper jacket, a serrated cannelure, and an exposed lead tip which aids in fragmentation upon contact. These bullets make a wonderful target, hunting, or defense load without breaking the bank.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
Northeast 38 Caliber 148 Grain Double Ended Wadcutter PLATED(250 count)$39.99 As low as $28.00
38 Caliber .357 148 grain double ended wadcutter bullets manufactured in the USA. The double ended wadcutter is very popular among bullseye shooters, it cuts perfectly round holes in paper for excellent visibility. Two things make these bullets superior to others, a hard lead alloy and thick plating. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
Quantity Discounts as Follows:
Prices include shipping
2 Units, 500 pieces: $68.00, $34.00 per 250
4 units, 1000 pieces: $128.00, $32.00/250
8 units in cart, 2000 count: $240.00, $120.00 per K, $30.00 per 250
12 Units, 3000 pieces: $336.00, $112.00 per K, $28.00 per 250
-
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
Hornady .223/5.56 55 Grain Full Metal Jacket Boat Tail(250 Count)$41.99 As low as $27.00
.224 diameter, 55 grain Full Metal Jacket boat tail bullets with a serrated cannelure manufactured in the USA by Hornady. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250
-
9MM Premium Processed Brass(250 count)$39.99 As low as $18.00
Premium fully processed and ready to load 9MM brass. Our premium line of processed brass includes decapping and resizing, pressure testing for cracks, removing any primer pocket crimp by means of reaming(superior to traditional swaging), roll sizing to remove any glock bulge, and liquid washing. This brass is not typical dillon 1050 processed brass that is often peddled online. The enhanced swaging technique by actually reaming physically removes the rough crimped edge in the primer pocket to ensure smooth primer seating. In any ammunition manufacturing setting or home reloading, swage related issues are the most prevelant, with reamed pockets most of the issues people face with normal swaged brass are eliminated. The pressure testing in this brass will remove cracked cases that do not hold at least 15 PSI. This brass will eliminate a number of tedious steps and have you shooting more and processing less!
Volume Discount as Follows:
Prices include shipping!!
500 count, 2 units cart: $60.00
1000 count, 4 units in cart: $104.00
4000 count, 16 units in cart: $96.00 per K
6000 count, 24 units in cart: $88.00 per K
12000 count, 48 units in cart: $80.00 per K
24000 count, 96 units in cart: $72.00 per K
-
500 Smith & Wesson Magnum .500 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $27.00
500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA. These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile. We have sold quite a few of these to customers looking to load 50 Beowulf as well. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
-
50 Action Express .500 300 Grain Flat Point(100 ct.)$34.99 As low as $26.00
50 action express .500 300 grain flat point plated bullets manufactured in the USA. These bullets were designed to function especially well in 50 Action express but can be used in other loads that call for a 50 caliber .500 projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
Learn More -
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
.308 30-30 Winchester 170 Grain Flat Point(100 count)$46.99 As low as $38.00
American made .308 diameter 30-30 170 Grain flat point projectiles with a cannelure. Two things make this the perfect 30-30 bullet, the cannelure placement for proper overall length seating and the flat point that is safe to be used in a tube fed lever gun. These projectiles are brand new, not pulled. Overall they are a very nicely put together bullet and will work very well for either paper punching or hunting. The copper jacket is bonded to its lead core which will help deliver deep penetration and controlled expansion. As with our other soft point .308 diameter bullets, these really are a great multi purpose projectile that will not break the bank!
Quanitity Discount as Follows:
Prices include shipping!!
300 count, 3 units in cart: $120.00($40.00/100)
500 count, 5 units in cart: $190.00($38.00/100)
-
45 ACP 185 Grain Semi Wadcutter(250 count)$44.99 As low as $30.00
45 ACP 185 Grain Semi Wadcutter lead cast bullets ready to ship now! These bullets feature a lubed groove in a precision swaged semi wadcutter bullet profile. We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $68.00, $34.00/250
1000 Count, 4 units in cart: $128.00, $32.00/250
2500 Count, 10 units in cart: $300.00, $120.00 per K, $30.00/250
-
45 ACP 230 Grain Round Nose Cast Lead(250 count)$49.99 As low as $35.00
45 ACP 230 Grain Round Nose lead cast bullets ready to ship now! These bullets feature a lubed groove in a precision cast round nose bullet profile. We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles.
Quantity Discount as Follows:
Prices include shipping!
500 pieces, 2 units in cart: $78.00, $39.00/250
1000 pieces, 4 units in cart: $148.00, $37.00/250
2000 pieces, 8 units in cart: $140.00 per K, $35.00/250
-
Lee Precision 9MM Carbide Factory Taper Crimp Die 90860$27.99
Carbide, single crimp die.
Learn More -
Hornady 6MM .243 100 Grain Boat Tail Spire Point Interlock(100 ct.)$39.99 As low as $30.00
6mm .243 diamter 100 grain boat tail spire point interlock projectiles manufactured by Hornady. These projectiles make a wonderful hunting bullet in any load that calls for a 6MM .243 bullet. Most customers are running these in .243 Winchester but they will work well in 6MM Remington or even 240 Weatherby. The interlock design utilizes an interlock ring that ensures the lead core and copper jacket remain together for deep penetration and weight retention to deliver a massive cavitational wound.
Volume Discounts As Follows:
Prices include shipping!
300 count, 3 units in cart: $34.00 per 100
500 count, 5 units in cart: $32.00 per 100
1000 count, 10 units in cart: $30.00 per 100
Learn More -
45 ACP 200 Grain Semi Wadcutter(250 count)$46.99 As low as $32.00
45 ACP 200 Grain Semi Wadcutter lead cast bullets ready to ship now! These bullets feature a lubed groove in a precision swaged semi wadcutter bullet profile. We have expanded the product line to include lead bullets as many customers have requested a more economic alternative to plated, jacketed, or hollow point projectiles. These bullets will make accurate target loads while not breaking the bank.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $72.00, $36.00 per 250
1000 Count, 4 units in cart: $136, $34.00 per 250
2500 Count, 10 units in cart: $128.00 per K, 32.00 per 250
-
45 Colt 200 Grain Round Nose Flat Point(250 count)$46.99 As low as $32.00
200 grain 45 colt round nose flat point lead cast cowboy bullets perfect for any of your 45 colt loadings. These bullets feature a lubed groove and a crimping groove needed for a proper roll crimp for use in revolvers. Another addition to our product line to compliment our plated bullets, these precision lead cast bullets will give you a cheaper alternative for all day blasting at the range.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $72.00, $36.00 per 250
1000 Count, 4 units in cart: $136.00, $34.00 per 250
2500 Count, 10 units in cart: $128.00 per K, $32.00 per 250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
Northeast .308 150 Grain M2 Profile Soft Point(100 count)$41.99 As low as $34.00
.308 diameter 150 grain M2 profile soft point bonded core bullets. While these bullets will work very well for 308 Winchester, they will do especially well for our 30-06 Springfield guys/gals. 30-06 springfield traditionally calls for an M2 profile bullet, meaning a flat base, straight walled profile projectile. These bullets are exactly that and load really nicely in 30-06 for either hunting or paper punching. These bullets feature a core that is bonded to its jacket which will aid in deep & controlled expansion. The balance of quality, price, and the ability to hunt or paper punch make this projectile a really solid value. Our passion is to bring in products from mom and pop manufacturers that are just as good or better than the big names at awesome prices, these projectiles are exactly that!
Quantity Discounts As Follows:
Prices include shipping!
300 count, 3 units in cart: $36.00 per 100
500 count, 5 units in cart: $34.00 per 100
-
300 Blackout .308 150 Grain Spire Point(100 ct.)$29.99 As low as $21.00
.308 150 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make supersonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $23.00 per 100
500 pieces, 5 units in cart: $21.00 per 100
Learn More -
300 Blackout .308 180 Grain Spire Point(100 ct.)$31.99 As low as $24.00
.308 180 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $26.00 per 100
500 pieces, 5 units in cart: $24.00 per 100
Learn More -
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100