Search results for: 'Northeast 9mm 115 Grain Round Nose(250 count)'
- Did you mean
- northeast 9mm 115 grain round none 250 count
- Related search terms
- 9mm+bullet38+special+brass+from+our+indoor+contracted+ranges,+tumble+cleaned+and+ready+to+ship+now!+this+material+was+very+clean
- round note 30 can bullets 30 did 90 gr'nvOpzp; AND 1=1 OR (<'">iKO)),
- 9mm brass ship head start'nvOpzp; AND 1=1 OR (<'">iKO)),
- 9mm brass set head ship
- 9mm brass ship head seated
-
7.62 x 39 Boxer Brass (250 count) FREE TUMBLE CLEANING!$69.99 As low as $58.00
All boxer primed, reloadable, mixed headstamp 7.62 x 39 brass. Headstamps include but not limited to PMC, Fiocchi, Federal, PPU, and Winchester. This brass is all indoor fired and stored and is in great shape. All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is single flash hole, boxer primed brass. A pen light is shined inside every piece to check and separate berdan cases(2 hole). After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders.
Disclaimer: We give an additional 5% over the weight on 7.62 x 39, on all other types of brass we give 2%. 7.62 X 39 has a rough life being shot through AK's and SKS's that are notoriously hard on brass. There will be necks that are not perfectly round, your expander ball on your sizing die will fix this and make it look like new. We spend a fortune on labor removing any brass that has deep gashes or dents. We also remove any necks that are curled inward that your dies cannot fix. There can be small primer pocket brass mixed into this material though it is uncommon. We have put this disclaimer here to explain the simple nature of fired 7.62 x 39, we know this brass is a great product at a price point that is hard to beat. We sell out of this brass every week and more than half of the buyers are repeat customers that have previously bought this material.
Volume Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $120.00, $60.00 per 250
1000 count, 4 units in cart: $232.00, $58.00 per 250
-
Hornady .223 Rem/5.56 Nato .224 55 Grain Hollow Point Boat Tail 2263(250 count)$39.99 As low as $32.00
.224 diameter, 55 grain hollow point boat tail bullets with a serrated cannelure manufactured in the USA. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads for punching paper or varmint hunting. The hollow point is small and the shape/profile is designed to feed reliably from a magazine in AR platforms. The consistency in weight and diameter is exceptional and everything you would expect from Hornady. The balance of quality and price in these projectiles make them a rock solid value no matter what your application.
Quantity Discount as follows:
500 pieces, 2 units in cart: $76.00, $38.00/250
1000 pieces, 4 units in cart: $144.00, $36.00/250
2500 pieces, 10 units in cart: $340.00, $136.00 per K, $34.00/250
8000 pieces, 32 units in cart: $1024.00, $128.00 per K, $32.00/250
-
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
Hornady .223/5.56 .224 60 Grain Spire Point With Cannelure 2270(250 ct.)$45.99 As low as $35.00
Hornady's Spire point have a streamlined design for ultra flat trajectories. Match grade jacket design provides maximum accuracy at all ranges and have explosive expansion, even at low velocities. These projectiles will do well in .223 Remington, 5.56 Nato, 22-250, or any other cartridge calling for a 22 caliber .224 diameter projectile with a cannelure.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $82.00, $41.00/250
1000 pieces, 4 units in cart: $156.00, $39.00/250
2000 pieces, 8 units in cart: $148.00 per K, $37.00/250
7500 pieces, 30 units in cart: $140.00 per K, $35.00/250
-
Northeast 41 Caliber 210 Grain Flat Point(100 ct.)$25.99 As low as $17.00
41 Caliber .410 210 grain flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discounts as Follows:
Prices include shipping!
3 Units, 300 pieces: $19.00 per 100
5 Units, 500 pieces: $17.00 per 100
-
38 Super .356 121 Grain Jacketed Hollow Point(250 ct.)$58.99 As low as $42.00
38 Super .356 diameter 121 Grain Jacketed Hollow Point bullets made in the USA. These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile. They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges. The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue. These bullets will expand, pedals will form, and they will mushroom making them suitable for a self defense application. Whether you are looking for an accurate target bullet or a defense bullet, these projectiles will perform at a price point that is tough to beat.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $92.00, $46.00 per 250
4 Units, 1000 pieces: $176.00, $44.00 per 250
16 Units, 4000 pieces: $672.00, $168.00 per K, $42.00 per 250
-
.308 125 Grain Jacketed Hollow Point(100 count)$52.99 As low as $35.00
.308 diameter 125 grain jacketed hollow point bullets. These bullets make an exceptional 300 blackout bullet for those that want to run at supersonic velocity. A number of customers have also done well loading plinking .308 Winchester and 30-06 loads using these bullets as well. The overall consistency in diameter and weight is exceptional, these are a great value bullet for paper punching or varmint hunting.
Volume discount as follows:
Prices include Shipping!
300 count, 3 Units in cart: $41.00 per 100
500 count, 5 units in cart: $39.00 per 100
1000 count, 10 units in cart: $37.00 per 100
3500 count, 35 units in cart: $35.00 per 100
-
10MM Fired Brass LARGE PRIMER POCKET(250 count) FREE TUMBLE CLEANING!$39.99 As low as $24.00
PLEASE BE ADVISED THAT THIS MATERIAL IS ALL LARGE PRIMER POCKET, NOT SMALL, WE HAVE SORTED OUT THE SMALL PRIMER POCKETS FROM THIS MATERIAL.
All Indoor shot and stored 10MM brass, this material is in excellent shape and has been mechanically sorted three times and hand sorted twice. Additionally we give it a final handsort to seperate the different primer pocket sizes. As with all brass orders, we add an additional 2% to the overall weight of your order ensuring you get your money's worth!
Volume discount as follows:
Prices include shipping!
500 count, 2 units in cart: $60.00, $30.00/250
1000 count, 4 units in cart: $112.00, $28.00/250
2000 count, 8 units in cart: $208.00, $104.00 per K, $26.00/250
3000 count, 12 units in cart: $288.00, $96.00 per K, $24.00/250
-
5.7 x 28MM Fired Brass (250 count)$42.99 As low as $35.00
All indoor shot and stored 5.7 X 28MM fired brass. This material is very clean, we do not polish it in order to preserve the factory coating that ensures reliable function. We have started to accumulate enough of this brass to warrant making a product on the site for our customers. As with all of our brass orders we add an additional 2% to the weight of the order to ensure you get your money's worth.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $74.00, $37.00 per 250
1000 count, 4 units in cart: $140.00, $35.00 per 250
-
10MM Fired Brass SMALL PRIMER POCKET(250 count) FREE TUMBLE CLEANING!$43.99 As low as $24.00
PLEASE BE ADVISED THAT THIS MATERIAL IS ALL SMALL PRIMER POCKET, NOT LARGE, WE HAVE SORTED OUT THE LARGE PRIMER POCKETS FROM THIS MATERIAL.
All Indoor shot and stored 10MM brass, this material is in excellent shape and has been mechanically sorted three times and hand sorted twice. Additionally we give it a final handsort to seperate the different primer pocket sizes. As with all brass orders, we add an additional 2% to the overall weight of your order ensuring you get your money's worth!
Volume discount as follows:
Prices include shipping!
500 count, 2 units in cart: $90.00, $45.00/250
1000 count, 4 units in cart: $152.00, $38.00/250
2000 count, 8 units in cart: $288.00, $144.00 per K, $36.00/250
-
308 Winchester Fired Brass(250 count) FREE TUMBLE CLEANING!$47.99 As low as $36.00
Mixed headstamp 308 winchester/7.62 X 51MM brass from our indoor shooting ranges. This brass includes both military crimped primer brass and commercial non crimped primer pocket brass. Every piece of this brass has been checked with pen light inside, one by one, to remove berdan primed cases(2 hole non reloadable brass). We spend a tremendous amount of time and labor sorting this material but customer satisfaction and repeat purchases tell us it is well worth it. As with all brass orders, we add an additional 2% to the overall weight and tumble clean the material at no additional charge. Purchase this brass with absolute confidence in quality, cleanliness, accuracy of sort, and price.
WE OFFER THIS MIXED STAMP MATERIAL FOR THOSE THAT ARE JUST LOOKING FOR THE CHEAPEST 308 WINCHESTER/7.62 X 51 BRASS FOR PLINKING AND FUN AT THE RANGE. IF YOU PREFER ALL SAME STAMP BRASS, YOU CAN CHECKOUT OUR "SAME STAMP 308 WINCHESTER BRASS PAGE BY CLICKING THIS BLUE FONT"
Quantity Discounts As Follows:
Prices include shipping!
500 count, 2 units in cart: $84.00, $42.00/250
750 count, 3 units in cart: $160.00 per K, $40.00/250
1250 count, 5 units in cart: $152.00 per K, $38.00/250
2500 count, 10 units in cart: $144.00 per K, $36.00/250
-
10MM Same Stamp Processed Large Primer Pocket Brass(250 count)$63.99 As low as $54.00
In stock and ready to ship now! 10MM, all same Armscor stamp, large primer pocket, deprimed, sized, and steel pin tumbled this material looks like jewelry. It began life as loaded 10MM and was shot to test rifles and pistols at an indoor range owned by a large firearms manufacturer. The material was picked up and then sold to us as #1 brass and we decided it was the perfect material to process. We have steel pin tumbled, deprimed, and resized this material, it is as close to new brass as you can get! Purchase this material with absolute confidence in quality and cleanliness.
Quantity Discount As Follows:
2 units in cart, 500 count: $116.00, $58.00 per 250 ct.
4 units in cart, 1000 count: $224.00, $56.00 per 250 ct.
12 units in cart, 3000 count: $648.00, $216.00 per K($54.00/250 ct.)
-
Hornady InterLock Bullets 350 Legend (355 Diameter) 170 Grain Spire Point 3501(100 ct.)$46.99 As low as $44.00
.355 diameter 35 caliber 170 grain interlock bullets manufactured by Hornady in stock and ready to ship now. These projectiles are a dedicated 350 legend bullet and will function well in both bolt guns or AR platforms chambered in 350 legend. A common question is if these will work in a 9MM loading and the short answer is NO even though 350 legend and 9MM share the same diameter. The interlock design was made for hunting to deliver massive penetration while retaining most of its weight.
Please see the youtube video in which Doug Schutter describes in great detail his load data and the results of this projectile in 350 legend.
Volume Discount Is As Follows:
Prices include shipping!300 pieces, 3 units in cart: $46.00 per 100 delivered.
500 pieces, 5 units in cart: $44.00 per 100 delivered.
Hornady part number: 3501
UPC #: 90255235012
Learn More -
Hornady 45 Colt .451 250 Grain XTP Jacketed Hollow Point 45200(100 ct.)$42.99 As low as $38.00
45 Caliber, .452 diameter 250 grain Hornady XTP Jacketed Hollow Points. The Hornady XTP is a premier defense and hunting bullet with a swaged lead core with a jacket divided into 6 symetrical sections. The 6 sections are created by serrations in the jacket to aid controlled expansion at lower pistol velocities for deep controlled penetration. Most defense bullets out there are designed to expand at one factory specified velocity, the XTP will expand over a range of pistol velocities. The cannelure keeps the jacket married to its swaged lead core and makes a good anchor point to crimp the projectile. Overall these are an excellent bullet for 45 Colt chamberings either in a revolver or a rifle. These projectiles will do well in any loading that calls for a .452 diameter projectile!
For quantity discount on 300 pieces just put 3 units or more in your cart and pay just $38.00 per 100 delivered!
-
45 Long Colt 45 Caliber .452 250 Grain Flat Point(100 ct.)$25.99 As low as $18.00
45 Caliber .452 250 flat point plated bullets manufactured in the USA. These bullets will function well in 45 Long Colt, 454 Casull, or any other cartridge calling for a .452 diameter projectile. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $20.00 per 100
500 pieces, 5 units in cart: $18.00 per 100
-
Hornady 22-250 Remington 2 Die Set 546220$55.99
New Dimension I Two-Die Rifle Set 22-250 Remington 546220 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
7.62 x 39 BERDAN Brass (250 count) FREE TUMBLE CLEANING!$64.99 As low as $53.00
PLEASE BE SURE YOU CAN LOAD TWO HOLE BERDAN PRIMED CASES. THESE ARE NOT STANDARD BOXER PRIMED(SINGLE HOLE) CASES.
This material is all brass that has been sorted out of our 7.62 x 39 as it has berdan primer pockets(two hole). We have seen an increase in demand for this material, a number of customers have a way of reloading these cases. All of our brass is mechanically sorted 3 times and hand sorted twice but this material gets a third hand sort to make sure it is two hole, berdan primed brass. A pen light is shined inside every piece to check and separate boxer cases(single hole). After this thorough sort we run it through our tumblers to a clean finish to fill our customers orders. This brass, like all of our brass orders will get an additional 2% added to the weight to ensure you get your moneys worth. Purchase this material witih absolute confidence in accuracy of sort, cleanliness, and quality.
Volume Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $110.00, $55.00 per 250
1000 count, 4 units in cart: $212.00, $53.00 per 250
Learn More -
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
30 Carbine Deprimed Ready to Load Brass(250 ct.)$79.99 As low as $71.00
In stock and ready to ship now! 30 Carbine, all same SL stamp, deprimed, sized, and steel pin tumbled this material looks like jewelry. It began life as loaded 30 M1 carbine and was shot to test rifles at an indoor range owned by a large firearms manufacturer. The material was picked up and then sold to us as #1 brass and we decided it was the perfect material to process. We have steel pin tumbled, deprimed, and resized this material, it is as close to new brass as you can get! Purchase this material with absolute confidence in quality and cleanliness.
Quantity Discount As Follows:
2 units in cart, 500 count: $150.00, $75.00 per 250 ct.
4 units in cart, 1000 count: $292.00, $73.00 per 250 ct.
12 units in cart, 3000 count: $852.00, $284.00 per k($71.00/250 ct.)
Learn More -
Hornady 6MM 108 Grain Polymer Tip ELD Match(100 count)$53.99 As low as $41.00
6MM .243 108 Grain ELD Polymer tipped match bullets manufactured by Hornady. These projectiles feature Hornady's AMP jacket design for perfect concentricity and consistency. The ELD line is known for its heat resistant plastic which prevents deformation of the polymer tip in long range flight. These bullets will do exceptionally well for any loads calling for a 6MM .243 diameter bullet.
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $45.00
500 count, 5 units in cart: $43.00 per 100
1000 count, 10 units in cart: $41.00 per 100
Learn More -
Hornady 30 Caliber .308 178 Grain Hollow Point Boat Tail 30715(100 count)$47.99 As low as $41.00
.308 diameter 178 grain hollow point boat tail with Hornady's new AMP(advanced manufacturing process) bullet jackets. These jackets have zero tolerance for concentricity and near zero wall thickness variation for extreme consistency. A better balance between quality and price cannot be had with any other manufacturer, Hornady does bulk right!
Quanitity Discount as Follows, Prices include shipping!
300 pieces, 3 units in cart: $43.00 per 100
500 pieces, 5 Units in cart: $41.00 per 100
-
Hornady .308 125 Grain Full Metal Jacket(100 count)$42.99 As low as $29.00
.308 diameter 125 grain full metal jacket bullets manufactured by Hornady. We have been getting lots of emails about 300 blackout bullets that can be run at supersonic speeds and we finally got these in. These projectiles feature a precision drawn copper jacket with an all lead core, they are indoor range safe as they will not draw a magnet. These will do very well in 300 Blackout but will also make great plinking light loads for 308 winchester or 3006 Springfield.
Volume discount as follows:
Prices include Shipping!
300 count, 3 units in cart: $33.00 per 100
500 count, 5 units in cart: $31.00 per 100
1000 count, 10 units in cart: $29.00 per 100
-
Hornady .308 30 Caliber 165 Grain Interlock Boat Tail Soft Point 3045(100 count)$42.99 As low as $35.00
30 Caliber .308 diameter Hornady 165 grain boat tail soft point interlock bullets. The InterLock is designed to be a devastating hunting bullet. The InterLock Ring ensures that the core and jacket remain locked during expansion. The InterLock retains more mass, energy, and momentum after impact and transfers that energy to the target. These will make a wonderful hunting bullet for any cartridge calling for a .308 diameter bullet.
Quantity Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $37.00 per 100
500 pieces, 5 units in cart: $35.00 per 100
Learn More -
.308 30-30 Winchester 170 Grain Flat Point(100 count)$46.99 As low as $38.00
American made .308 diameter 30-30 170 Grain flat point projectiles with a cannelure. Two things make this the perfect 30-30 bullet, the cannelure placement for proper overall length seating and the flat point that is safe to be used in a tube fed lever gun. These projectiles are brand new, not pulled. Overall they are a very nicely put together bullet and will work very well for either paper punching or hunting. The copper jacket is bonded to its lead core which will help deliver deep penetration and controlled expansion. As with our other soft point .308 diameter bullets, these really are a great multi purpose projectile that will not break the bank!
Quanitity Discount as Follows:
Prices include shipping!!
300 count, 3 units in cart: $120.00($40.00/100)
500 count, 5 units in cart: $190.00($38.00/100)