Search results for: 'accurate 250'
- Related search terms
- 250 reloading bullets bodi tool
- 250 reloading bullets bond tool
- 250+5.56+fore+brass+50+coat+for+tumbl+cleaning
- 250 reloading bullets brass tool
- 2500 reloading bullets brass tail
-
Hornady 45 Colt .451 250 Grain XTP Jacketed Hollow Point 45200(100 ct.)$42.99 As low as $38.00
45 Caliber, .452 diameter 250 grain Hornady XTP Jacketed Hollow Points. The Hornady XTP is a premier defense and hunting bullet with a swaged lead core with a jacket divided into 6 symetrical sections. The 6 sections are created by serrations in the jacket to aid controlled expansion at lower pistol velocities for deep controlled penetration. Most defense bullets out there are designed to expand at one factory specified velocity, the XTP will expand over a range of pistol velocities. The cannelure keeps the jacket married to its swaged lead core and makes a good anchor point to crimp the projectile. Overall these are an excellent bullet for 45 Colt chamberings either in a revolver or a rifle. These projectiles will do well in any loading that calls for a .452 diameter projectile!
For quantity discount on 300 pieces just put 3 units or more in your cart and pay just $38.00 per 100 delivered!
-
44 Caliber 240 Grain Jacketed Soft Point(100 count)$40.99 As low as $26.00
44 caliber .429 diameter 240 grain jacketed soft points made in the USA. These bullets feature a precision drawn copper jacket with a fully enclosed rear making for a very clean burning accurate bullet. The lead soft point make this bullet an excellent choice for hunting or self defense. A serrated cannelure is present in these bullets for a firm taper crimp to avoid bullet setback from recoil associated with 44 magnum loads. These bullets will run very well in both lever guns or pistols for paper punching, hunting, or defense. You can hammer them down range at magnum velocities or send them slowly in your 44 special for minimal recoil. However you load these, if a .429 diameter 240 grain bullet that isn't to expensive is what you need, look no further!
Volume Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $96.00 or $32.00 per 100
500 pieces, 5 units in cart: $150.00 or $30.00 per 100
1000 pieces, 10 units in cart: $280.00 or $28.00 per 100
2000 pieces, 20 units in cart: $520.00 or $260.00/K, $26.00 per 100
Learn More -
Hornady 6MM .243 58 Grain V-Max 24114(250 ct.)$55.99 As low as $47.00
Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and helps to stabilize the bullet in flight. It also acts as a wedge, initiating bullet expansion.
The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles.Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $102.00, $51.00 per 250
1000 Count, 4 units in cart: $196.00, $49.00 per 250
2500 Count, 10 units in cart: $470.00, $47.00 per 250
Learn More -
10MM Nickel Plated Brass LARGE PRIMER POCKET(250 count)$54.99
All Indoor shot and stored, Nickel plated, large primer pocket 10MM brass. This material is in excellent shape and is ready to ship now! Headstamps include but are not limited to Federal, Speer, Winchester, and Remington. Anyone looking to make match grade or defense ammo, this nickel brass is perfect for you.
-
35 Caliber .358 250 Grain Soft Point(100 Count)$59.99 As low as $51.00
These projectiles are a bonded core .358 diameter soft point in a spire point profile with a serrated cannelure. The precision swaged lead core is bonded to its copper jacket which will aid in deep controlled expansion and will not break apart. While these bullets make an excellent hunting round, at this price point, one can justify shooting paper targets as well. These bullets will do well in 358 Winchester, 35 Whelen, 358 Norma Magnum, or 350 remington magnum. These can work for 35 remington only if you do not load up a tube magazine and you single shot each round, these cannot be loaded in a tube magazine. These bullets can effectively and ethically take any animal in North America. These are an excellent quality hunting bullet at a price point that is hard to beat.
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $53.00 per 100
500 count, 5 units in cart: $51.00 per 100
Learn More -
50 Action Express Fired Brass **Tumble Cleaned**(250 count)$79.99
Excellent quality, mixed stamp 50 Action Express fired brass. This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass. We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth. Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically. Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.
-
9MM Premium Processed Brass(250 count)$39.99 As low as $18.00
Premium fully processed and ready to load 9MM brass. Our premium line of processed brass includes decapping and resizing, pressure testing for cracks, removing any primer pocket crimp by means of reaming(superior to traditional swaging), roll sizing to remove any glock bulge, and liquid washing. This brass is not typical dillon 1050 processed brass that is often peddled online. The enhanced swaging technique by actually reaming physically removes the rough crimped edge in the primer pocket to ensure smooth primer seating. In any ammunition manufacturing setting or home reloading, swage related issues are the most prevelant, with reamed pockets most of the issues people face with normal swaged brass are eliminated. The pressure testing in this brass will remove cracked cases that do not hold at least 15 PSI. This brass will eliminate a number of tedious steps and have you shooting more and processing less!
Volume Discount as Follows:
Prices include shipping!!
500 count, 2 units cart: $60.00
1000 count, 4 units in cart: $104.00
4000 count, 16 units in cart: $96.00 per K
6000 count, 24 units in cart: $88.00 per K
12000 count, 48 units in cart: $80.00 per K
24000 count, 96 units in cart: $72.00 per K
-
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
32 Caliber 100 Grain Accu Coat Round Nose Flat Point(250 ct.)$32.99 As low as $27.00
32 caliber .313 diameter, 100 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, put two units in your cart(500 ct.) and pay just $54.00 delivered!
Learn More -
38 Caliber 125 Grain Accu Coat Round Nose Flat Point(250 ct.)$34.99 As low as $27.00
38 caliber .358 diameter, 125 grain nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For quantity discount, put 4 units(1000 pieces) in cart and pay just $108.00 delivered!
Learn More -
357 Magnum Nickel Plated Brass(250 count) FREE TUMBLE CLEANING!$54.99
All indoor shot and stored 357 magnum nickel plated fired brass, tumble cleaned and fully sorted to remove any yellow brass. As we have mentioned on other product pages regarding our brass, this material is 3 times sorted mechanically and 2 times sorted by hand to remove any damages, lives, or foreign calibers. The key component to our sorting process when dealing with either 38 special or 357 magnum is having a machine in house that sorts by height. The accuracy of our 357 magnum sort is exceptional due to the fact that we are able to sort not only by case diameter but also by height. We are tumble cleaning this material to a nice shine and as with all of our brass we are adding 2% to the overall wieght of the order to ensure you get your money's worth. The headstamps in this brass include but are not limited to Remington, Federal, Speer, and Winchester. You can purchase this brass with absolute confidence in overall quality, accuracy of sort, and cleanliness.
As with our 45-70 Government brass, we remove the Hornady headstamps. Hornady stamps in Nickel 357 magnum are usually loaded with their FTX bullet, to accomodate the longer bullet, Hornady nickel brass is much shorter than the usual 357 magnum. Most people are not setup to load this short brass so we now remove it. We are stock piling this hornady 357 magnum brass, if you are able to load it and would like to purchase it, just email us. See the email address on the top of this page in the blue margin.
-
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
44 Caliber .429 240 Grain Flat Point(100 ct.)$25.99 As low as $17.00
44 Caliber .429 240 grain round nose flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $19.00 per 100
500 pieces, 5 units in cart: $17.00 per 100
-
.243 Nickel Fired Brass(100 ct.) **Free Tumble Cleaning**$64.99
Excellent quality Nickel .243 Winchester brass, all indoor shot and stored, polished and ready to ship now! This material came from a large firearms manufacturer's test range. This brass has been sorted mechanically three times and by hand twice. We also add an additional 2% to the overall weight of the material to ensure you get your money's worth. Purchase this brass with absolute confidence in cleanliness and accuracy of sort.
-
.243 Winchester Fired Brass(100 count)$49.99
Excellent quality .243 Winchester brass, all indoor shot and stored, polished and ready to ship now! This material is in great shape, headstamps include but are not limited too Remington, Federal, Hornady, and Winchester. This brass has been sorted mechanically three times and by hand twice. The final handsort prior to shipping is the most important sort as we make sure no cases with blown out primers or foreign calibers got by. We also add an additional 2% to the overall weight of the material to ensure you get your money's worth. Purchase this brass with absolute confidence in cleanliness and accuracy of sort.
-
45-70 Government HORNADY STAMP ONLY Fired Brass(50 Count)$54.99
All Indoor shot and stored Hornady Stamp only 45-70 Government brass. This material has been mechanically sorted three times and hand sorted twice. We have polished the material so it is ready for for you to begin processing immediately.
We sort this stamp out since hornady cuts its brass shorter to accomodate their longer ogive FTX Flex tip bullet. According to Hornady volume 10, 2.04" is the required trim length for their brass to accomodate the Hornady 250 grain monoflex and the 325 grain FTX projectile due to longer Ogive.
THIS BRASS IS SHORTER THAN REGULAR 45-70, YOU MUST BE CERTAIN YOU CAN LOAD IT PRIOR TO PURCHASING IT, YOU MUST DO YOUR RESEARCH.
Learn More -
44 Caliber .429 220 Grain Flat Point(100 ct.)$24.99 As low as $16.00
44 Caliber .429 220 grain round nose flat point plated bullets manufactured in the USA. We brought these bullets in after a number of calls for a lighter 44 caliber bullet that would run well in 44 magnum but also 44 special. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $18.00 per 100
500 pieces, 5 units in cart: $16.00 per 100