Bulk Handgun Bullets

All indoor shot and stored large primer 45 ACP, mixed stamp material, fully sorted to remove small primer and nickel plated brass.  This is one of our best selling products on the site and for good reason.  It is mechanically sorted 3 times then sorted by hand twice to remove any damaged brass or foreign calibers.  Once it is brought to all 45 ACP it is then sorted by hand again to remove any small primer pocket brass.  As always we are tumbling this brass and adding an additional 2% to the overall weight of the order to ensure you get your money's worth.  Purchase this brass with absolute confidence in quality, accuracy of sort, and cleanliness.  

We have not had enough time to produce much of this material as it is so labor intense to remove the small primer from the large.  When we first started in 2010, small primer brass accounted for an average of under 5% of the total load.  Currently we are seeing between 30% and 50% small primer Blazer, Federal, and Speer brass that must be removed.  The time it takes to sort this material properly, the way our customers have come to expect has increased by an average of 600% from when we first starting selling this brass.  Though our labor cost has increased dramatically on this product, we will not cut corners and put out a sub par product, that is our commitment to our loyal customer base.

Quantity Discount as Follows:

Prices Always include shipping!

1000 count, 2 units in cart: $84.00, $42.00/500

1500 count, 3 units in cart: $120.00, $80.00 per K, $40.00/500

3000 count, 6 units in cart: $228.00, $76.00 per K, $38.00/500

50 Caliber Hornady 350 Grain XTP magnum jacketed hollow points, excellent for 50 Beowulf or 500 S&W Mag.  Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.

For quantity discount on 300 pieces, put three or more units in your cart and pay just $64.00 per 100 delivered!

38 Super .356 diameter 121 Grain Jacketed Hollow Point bullets made in the USA.  These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile.  They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are a great clean burning option for indoor ranges.  The rim of the hollow point has striations or cuts which will aid in the peeling back of the jacket upon contact with soft tissue.  These bullets will expand, pedals will form, and they will mushroom making them suitable for a self defense application.  Whether you are looking for an accurate target bullet or a defense bullet, these projectiles will perform at a price point that is tough to beat.  

Quantity Discounts are as Follows

40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue.  There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.

Prices include shipping

3 units in cart, 300 pieces: $31.00 per 100

5 units in cart, 500 pieces: $29.00 per 100

.355 diameter 35 caliber 170 grain interlock bullets manufactured by Hornady in stock and ready to ship now. These projectiles are a dedicated 350 legend bullet and will function well in both bolt guns or AR platforms chambered in 350 legend. A common question is if these will work in a 9MM loading and the short answer is NO even though 350 legend and 9MM share the same diameter. The interlock design was made for hunting to deliver massive penetration while retaining most of its weight.

Please see the youtube video in which Doug Schutter describes in great detail his load data and the results of this projectile in 350 legend.

Volume Discount Is As Follows:
Prices include shipping!

300 pieces, 3 units in cart: $46.00 per 100 delivered.

500 pieces, 5 units in cart: $44.00 per 100 delivered.

Hornady part number: 3501

UPC #: 90255235012

32 caliber .313 diameter, 100 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

For Quantity Discount, put two units in  your cart(500 ct.) and pay just $54.00 delivered!

44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.

For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!

38 caliber .358 diameter, 125 grain nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet. 

For quantity discount, put 4 units(1000 pieces) in cart and pay just $108.00 delivered!

41 Caliber .410 210 grain flat point plated bullets manufactured in the USA.   Two things make these bullets superior to others, a hard lead core and thick plating.  These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets.  The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets.  Other companies commonly sell the thicker plated bullets as a separate product for more money.  Thick plating and a harder lead core is the standard on all of our bullets.  These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.  We have tried many different brands of plated bullets and these are hands down the best we have seen.

500 Smith and Wesson 50 Caliber .500 350 grain flat point plated bullets with a cannelure, manufactured in the USA.  These bullets were designed to function especially well in 500 Smith and Wesson Magnum but can be used in other loads that call for a 50 caliber .500 projectile.  We have sold quite a few of these to customers looking to load 50 Beowulf as well.  Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.

Quantity Discount as Follows

Prices include shipping!

300 pieces, 3 units in cart:  $29.00 per 100

500 pieces, 5 units in cart:  $27.00 per 100