Search results for: 'Bullets+for+reloading+40'and'k'='o'
-
40 SW/10MM 180 Grain Jacketed Hollow Point(250 count)$69.99 As low as $56.00
American made 40 caliber jacketed hollow points weighing in at 180 Grains, perfect for any of your 10MM or 40 smith and wesson loads.  They feature a precision drawn copper jacket fully enclosing its base leaving  no exposed lead for a very clean shooting and accurate projectile.  These bullets make a wonderful target, defense, or general blasting bullet.  They are suitable for a defense application as they will expand properly upon contact with soft tissue.  These are an all around great mix of quality and price, a strong value for anyone looking for a solid multipurpose bullet for use in 40 Smith and Wesson or 10MM. Â
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $108.00 or $54.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
40 SW/10MM 165 Grain Jacketed Hollow Point(250 count)$53.99 As low as $42.00
American made, 40 caliber, jacketed hollow points weighing in at 165 Grains, perfect for any of your 10MM or 40 smith and wesson loads.  They feature a precision drawn copper jacket fully enclosing its base leaving  no exposed lead for a very clean shooting and accurate projectile.  These bullets make a wonderful target or general blasting bullet.
Quantity discount as follows:
Prices include shippingÂ
500 pieces, 2 units: $88.00, $44.00/250
2000 pieces, 8 units: $336.00, $168.00 per K, $42.00/250
Learn More -
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles.  Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.Â
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
Â
-
40 S&W 180 Grain Accu Coat Round Nose Flat Point(250 ct.)$38.99 As low as $29.00
40 S&W 180 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.Â
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $66.00, $33.00/250
4 Units, 1000 pieces: $124.00, $31.00/250
8 Units, 2000 pieces: $232.00, $116.00/K, $29.00/250
Â
-
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.Â
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
Â
-
Hornady XTP 10MM/40 S&W .400 155 Grain Jacketed Hollow Point(100 ct.)$38.99 As low as $29.00
40 S&W / 10MM .400 Diameter XTP Jacketed hollow point bullets from Hornady. These bullets feature a swaged lead core and a drawn copper jacket which are bonded together with its cannelure. The bond between jacket and core ensures controlled expansion across a range of velocities and weight retention upon entering soft tissue.  There are six serrations on the hollow point which allow for pedals to peel back for a mushroom effect. These projectiles make excellent defense or hunting loads in any cartridge calling for a .400 diameter projectile.
Prices include shipping
3 units in cart, 300 pieces: $31.00 per 100
5 units in cart, 500 pieces: $29.00 per 100
Learn More -
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. Â We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Â Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
Â
Learn More -
44-40 .427 200 Grain Round Nose Flat Point Accu Coat(100 ct.)$24.99 As low as $18.00
44-40 .427 diameter,200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, just put 3 units(300 pieces) in your cart and pay $18.00 per 100 delivered!
Â
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. Â These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. Â These bullets are incredibly uniform in weight and diameter and are priced right. Â Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet. Â
Quantity discount as follows:
Prices include shippingÂ
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
Hornady Custom Grade 40 S&W 10MM Auto 3 Die Set 546533$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as well.
Hornady part number:Â 546533
UPC #:Â 90255565331
Â
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads.  These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM.  These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms. Â
Quantity discount as follows:
Prices include shippingÂ
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
Hornady XTP Bullets 9mm (355 Diameter) 147 Grain Jacketed Hollow Point Box of 100$39.99 As low as $29.00
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
Volume Discount As Follows:
Prices include shipping!
300 count, 3 units in cart: $33.00 per 100
500 count, 5 units in cart: $31.00 per 100
1000 count, 10 units in cart: $29.00 per 100
Learn More -
40 Smith and Wesson Nickel Plated Law Enforcement Brass(500 pcs)$41.99 As low as $31.00
Excellent quality indoor shot and stored, Nickel 40 S&W brass from our law enforcement contracted ranges. Â This material has been mechanically sorted 3 times, hand sorted twice, and then tumble cleaned. Â Our multilayer sorting process followed by a tumbling in cob media ensures accuracy of sort and cleanliness. Â All brass orders receive an additional 2% on top of the ordered amount to ensure you get your money's worth. Â Headstamps include but are not limited too Hornady, Remington, Federal, Winchester, and Speer. Â Anyone looking to make their own defense or match grade ammo, there is no better brass than this!
Quantity discounts as follows
Prices Include Shipping!
1000 count, 2 units in cart: $70.00, $35.00/500
2000 count, 4 units in cart: $132.00, $66.00 per K, $33.00/500
4000 count, 8 units in cart: $248.00, $62.00 per K, $31.00/500
Â
Learn More -
40 Smith and Wesson Fired Brass (500 count) FREE TUMBLE CLEANING!$36.99 As low as $26.00
All indoor shot and stored 40 Smith and Wesson brass tumbled to a shine and ready to ship out now! Â This brass was spotless when we received it and we are still running it through our tumblers to give it that extra TLC. Â This material, like all of our brass has been sorted 3 times mechanically and twice by hand to remove any foreign calibers, lives, or damaged brass. Â Headstamps include but are not limited to Remington, Federal, Winchester, Blazer, and Speer, all nickel plated brass has been sorted out. Â We always add an additional 2% to the overall weight of all brass orders to ensure you get your money's worth. Â Feedback from customers since we began multiple follow up sorts, tumble cleaning, and the additional 2% added to the orders has been nothing but positive and repeat purchases have increased dramatically. Â Purchase this brass with confidence in quality, accuracy of sort, and cleanliness.
Quantity discounts as follows
Prices Include Shipping!
1000 count, 2 units in cart: $60.00, $30.00/500
2000 count, 4 units in cart: $112.00, $56.00 per K, $28.00/500
4000 count, 8 units in cart: $208.00, $52.00 per K, $26.00/500
Â
Learn More -
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. Â These bullets are perfect for 10MM or 40 Smith and wesson loadings. Â Two things make these bullets superior to others, a hard lead core and thick plating. Â These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Â The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Â Other companies commonly sell the thicker plated bullets as a separate product for more money. Â Thick plating and a harder lead core is the standard on all of our bullets. Â These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. Â We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, Â $32.00/250
Â
Learn More -
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. Â These bullets are perfect for 10MM or 40 Smith and wesson loadings. Â Two things make these bullets superior to others, a hard lead core and thick plating. Â These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Â The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Â Other companies commonly sell the thicker plated bullets as a separate product for more money. Â Thick plating and a harder lead core is the standard on all of our bullets. Â These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. Â We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, Â $35.00/250
Â
Learn More -
Hornady InterLock Bullets 350 Legend (355 Diameter) 170 Grain Spire Point 3501(100 ct.)$46.99 As low as $44.00
.355 diameter 35 caliber 170 grain interlock bullets manufactured by Hornady in stock and ready to ship now. These projectiles are a dedicated 350 legend bullet and will function well in both bolt guns or AR platforms chambered in 350 legend. A common question is if these will work in a 9MM loading and the short answer is NO even though 350 legend and 9MM share the same diameter. The interlock design was made for hunting to deliver massive penetration while retaining most of its weight.
Please see the youtube video in which Doug Schutter describes in great detail his load data and the results of this projectile in 350 legend.
Volume Discount Is As Follows:
Prices include shipping!300 pieces, 3 units in cart: $46.00 per 100 delivered.
500 pieces, 5 units in cart: $44.00 per 100 delivered.
Hornady part number: 3501
UPC #:Â 90255235012
Learn More -
Hornady XTP Mag Bullets 45 Caliber (452 Diameter) 240 Grain Jacketed Hollow Point Magnum Box of 100$63.99 As low as $55.00
Excellent for use in .454 Casull, 460 SW Magnum, and 45 Colt. The high pressures associated with 454 casull and 460 require a rugged bullet that will hold up and deliver devastating terminal ballistics. Hornady's flagship defense and hunting bullets in 45 caliber(.452 diameter) 240 grain jacketed hollow points. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing for a tight crimp to prevent bullet setback associated with heavy recoil.
This is not loaded ammunition.
Volume Discount As Follows:
3 units in cart, 300 pieces: $57.00 per 100 count.
5 units in cart, 500 pieces: $55.00 per 100 count.
Learn More -
Hornady 45100 XTP Bullets 45 Caliber (451 Diameter) 185 Grain Jacketed Hollow Point Box of 100$56.99 As low as $38.00
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
Quantity Discount As Follows:
Prices include shipping!
300 piece, 3 units in cart: $44.00 per 100
500 pieces, 5 units in cart: $42.00 per 100
1000 pieces, 10 units in cart: $40.00 per 100
2500 pieces, 25 units in cart: $38.00 per 100
-
30 Carbine Reloadable Brass **Free Tumble Cleaning**(250 Count)$66.99
Polished 30 Carbine range brass, in stock and ready to ship now! After this material passes through our multi layered sorting process it must then be hand sorted for several reasons. Nearly every lot of 30 carbine brass has berdan(2 hole) primed cases and 327 Federal cases mixed in. Before shipping our employees look inside every case by hand with a pen light to ensure you only get reloadable boxer primed cases, no berdan cases in your order. 327 Federal is another problem with 30 Carbine brass, 327 is very similar in diameter and length but is a rimmed cartridge. Our employees will inspect every head stamp by eye/hand to make sure no 327 ends up in your order either. Â After this extensive sorting process, the yield of any load of 30 carbine are dramatically reduced, sometimes by as much as 35%! Â Until now we always kept 30 Carbine for our gunshow or local customers. Â We were able to produce enough to make a product on the website so here it is!
Â
IF THERE IS NO ADD TO CART BUTTON, THIS PRODUCT IS OUT OF STOCK. Â PLEASE CLICK THE LINK BELOW TOÂ SEE OUR PROCESSED READY TO LOAD 30 CARBINE!
LINK TO PROCESSED 30 CARBINE BRASS
Learn More -
303 British Reloadable Fired Brass(100 Count) **FREE TUMBLE CLEANING**$64.99
Excellent quality 303 British brass in stock and ready to ship now!  This item does not come around often and when it does it sells fast.  Much of what we receive in the way of 303 British is non reloadable berdan cased brass(2 flashholes).  The final sort prior to shipping includes looking inside every case with a pen light to make sure no berdan cases get by.  This material has been tumble cleaned and as with all brass orders we are adding an additional 2% to the overall weight to ensure you get your money's worth.  Purchase this brass with absolute confidence in cleanlinsess and quality of sort.
Â
Â
Â
Â
Learn More -
Hornady 44 Caliber .430 300 Grain XTP Jacketed Hollow Point 44280(100 ct.)$48.99 As low as $43.00
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power.
Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.For quanitity discount on 300 or more pieces, just put 3 units or more in your cart and pay just $43.00 per 100 pieces delivered.
Â
Learn More -
Hornady 45 Caliber .452 300 Grain XTP Magnum Jacketed Hollow Point 45235(100 ct.)$60.99 As low as $55.00
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. The XTP features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion.Â
These are the magnum variant of the XTP which is designed for greater pressure and velocity associated with cartridges such as 454 Casull.
Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.For quantity discount on 300 pieces, just put 3 units or more in your cart and pay just $55.00 per 100 delivered!
-
Hornady 44 Caliber .430 240 Grain XTP Jacketed Hollow Point 44200(100 ct.)$42.99 As low as $37.00
Hornady's flag ship defense and hunting bullets in 44 caliber 240 grain weight. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities.
For quantity discount on 300 pieces or more, just put 3 units or more in cart and pay just $37.00 per 100 pieces delivered.
Â
Learn More -
Hornady 380 ACP 3 Die Set Taper Crimp 546518$62.99
The Hornady 3-Die Pistol Taper Crimp Die Set is the perfect set of tools to precisely seat and taper-crimp your pistol bullets all in a one-step process. This set of dies includes a taper-crimp seater die a pistol-style expander die and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the Hornady Custom Grade line of custom pistol dies which features the innovative non-slip Zip-Spindle design ensuring not only a precise alignment but easy spindle-lock tightening as we
Learn More