Search results for: '30 Caliber M2 163 grain AP black tip projectiles(100 count)'
- Related search terms
- 30 Caliber M2 163 grain AP black tip projectiles(100 count)'nvOpzp; AND 1=1 OR (<'">iKO)),
- 30 Caliber M2 163 grain AP black tip projectiles(100 count)") AND 2973=6500 AND ("YIzJ"="YIzJ
- 30 Caliber M2 163 grain AP black tip projectiles(100 count)" AND 9679=(SELECT UPPER(XMLType(CHR(60)||CHR(58)||CHR(113)||CHR(106)
- 30 Caliber M2 163 grain AP black tip projectiles(100 count) AND 6215=(SELECT COUNT(*) FROM GENERATE_SERIES(1,5000000))-- xQJN
- 30 Caliber M2 163 grain AP black tip projectiles(100 count)')) WAITFOR DELAY '0:0:5' AND (('xxMv'='xxMv
-
Hornady 45 Colt .451 250 Grain XTP Jacketed Hollow Point 45200(100 ct.)$42.99 As low as $38.00
45 Caliber, .452 diameter 250 grain Hornady XTP Jacketed Hollow Points. The Hornady XTP is a premier defense and hunting bullet with a swaged lead core with a jacket divided into 6 symetrical sections. The 6 sections are created by serrations in the jacket to aid controlled expansion at lower pistol velocities for deep controlled penetration. Most defense bullets out there are designed to expand at one factory specified velocity, the XTP will expand over a range of pistol velocities. The cannelure keeps the jacket married to its swaged lead core and makes a good anchor point to crimp the projectile. Overall these are an excellent bullet for 45 Colt chamberings either in a revolver or a rifle. These projectiles will do well in any loading that calls for a .452 diameter projectile!
For quantity discount on 300 pieces just put 3 units or more in your cart and pay just $38.00 per 100 delivered!
-
38 Caliber 148 Grain Double Ended Wadcutter(250 count)$38.99 As low as $24.00
38 Caliber 148 grain double ended wadcutters perfect for your bullseye loads in 38 special. These bullets along with their hollow based cousin make a great bullseye bullets for guys/gals wanting to make light target loads and cut nice holes in paper. The quality of these bullets is exceptional and they will not break the bank!
Quantity Discount as Follows
Prices Include Shipping!
500 pieces, 2 units in cart: $60.00, $30.00/250
1000 pieces, 4 units in cart: $112.00, $28.00/250
2000 pieces, 8 units in cart: $208.00, $104.00/K, $26.00/250
3000 pieces, 12 units in cart: $288.00, $96.00/K, $24.00/250
-
38 Caliber 148 Grain Hollow Base Wadcutter(250 count)$38.99 As low as $24.00
38 Caliber 148 grain hollow base wadcutters perfect for your bullseye loads in 38 special. These bullets are the flagship bullseye bullets for guys/gals wanting to make light target loads and cut nice holes in paper. The hollow base makes for a very accurate load, when pressurized the skirt, the outside edges of the hollow base are forced outward engaging the rifling of the barrel making them incredibly accurate.
Quantity Discount as Follows
Prices Include Shipping!
500 pieces, 2 units in cart: $60.00, $30.00/250
1000 pieces, 4 units in cart: $112.00, $28.00/250
2000 pieces, 8 units in cart: $208.00, $104.00/K, $26.00/250
3000 pieces, 12 units in cart: $288.00, $96.00/K, $24.00/250
-
38 Caliber 125 Grain Accu Coat Round Nose Flat Point(250 ct.)$34.99 As low as $27.00
38 caliber .358 diameter, 125 grain nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For quantity discount, put 4 units(1000 pieces) in cart and pay just $108.00 delivered!
Learn More -
Hornady .50 50 Caliber 50 Action Express XTP Jacketed Hollow Point 50101(100 ct.)$64.99 As low as $59.00
Hornady 50 caliber .50 diameter 50 Action Express XTP jacketed hollow point bullets. These projectiles were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. The XTP bullet is really known for its stopping power. They were designed from the beginning to expand reliably at a variety of handgun velocities and deliver deep, terminal penetration with every shot. Most handgun bullets are designed to perform at a single factory-specified velocity where the XTP bullet is designed to offer controlled expansion over a range of velocities.
Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.For quantity discount on 300 pieces, just put 3 units or more in your cart and pay just $59.00 per 100 pieces delivered!
Learn More -
458 Socom .458 350 Grain Flat Point(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
45 ACP 185 Grain Semi Wadcutter Hollow Point(250 count)$46.99 As low as $32.00
45 ACP 185 Grain Semi Wadcutter Hollow Point lead cast bullets ready to ship now! These bullets feature a lubed groove in a precision swaged semi wadcutter Hollow Point bullet profile. We have expanded the product line to include lead projectiles as many customers have requested a more economic alternative to plated or jacketed projectiles. These bullets will make accurate target loads while not breaking the bank. We sell these most to our local bullseye shooters that also like the 38 caliber 148 Hollow base wadcutter.
Quantity Discount As Follows:
Prices include shipping!
500 count, 2 units in cart: $72.00, $36.00 per 250
1000 Count, 4 units in cart: $136.00, $34.00 per 250
2500 Count, 10 units in cart: $320.00, $128.00 per K, 32.00 per 250
-
45-70 Government .458 350 Grain Flat Point With Cannelure(100 ct.)$34.99 As low as $26.00
350 grain .458 diameter flat point plated bullets with a cannelure, manufactured in the USA. These bullets will make tack driving ammo for any cartridge calling for a .458 diameter bullet but are most commonly loaded in 45-70 Government and .458 Socom. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead and reduce barrel fouling. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter.
After years of trying a number of plated bullet companies, we have found these to be superior to all others. These are not a foreign made, sub par product commonly peddled online. The consistency in weight and diameter along with a thick plating make these truly superior to others. We will not compromise quality in an effort to save money, the saying "you get what you pay for" holds true with these bullets as with anything else.
Quantity Discount as Follows:
Prices Include Shipping!
300 pieces, 3 units in cart: $28.00 per 100
500 pieces, 5 units in cart: $26.00 per 100
-
Hornady .223/5.56 .224 60 Grain Spire Point With Cannelure 2270(250 ct.)$45.99 As low as $35.00
Hornady's Spire point have a streamlined design for ultra flat trajectories. Match grade jacket design provides maximum accuracy at all ranges and have explosive expansion, even at low velocities. These projectiles will do well in .223 Remington, 5.56 Nato, 22-250, or any other cartridge calling for a 22 caliber .224 diameter projectile with a cannelure.
Quantity Discount as follows:
Prices include freight!
500 pieces, 2 units in cart: $82.00, $41.00/250
1000 pieces, 4 units in cart: $156.00, $39.00/250
2000 pieces, 8 units in cart: $148.00 per K, $37.00/250
7500 pieces, 30 units in cart: $140.00 per K, $35.00/250
-
40 SW/10MM 180 Grain Full Metal Jacket Flat Point BR(250 count)$59.99 As low as $44.00
American made, 40 caliber full metal jacket flat point bullets weighing in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These projectiles have a slightly conical shaped flat point which aids in reliable feeding across many different firearms.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $100.00, $50.00/250
1000 pieces, 4 units in cart: $192.00, $48.00/250
2000 pieces, 8 units: $368.00, $184.00 per K, $46.00/250
2500 pieces, 10 units in cart: $440.00, $176.00 per K, $44.00/250
Learn More -
45 ACP 185 Grain Jacketed Hollow Point(100 count)$35.99 As low as $23.00
45 ACP .451 diameter 185 Grain Jacketed Hollow Point bullets made in the USA. These bullets feature a precision drawn copper jacket and a lead core in a hollow point profile. They are incredibly uniform in wieght and diameter, there is no exposed lead on rear end of these bullets so they are also a great clean burning option for indoor ranges. We have sold quite a few of these over the years and we haven't had them since 2019! We were very excited to get them back in stock!
Volume Discount As Follows:
Prices include shipping!
300 pieces, 3 units in cart: $31.00 per 100
500 pieces, 5 units in cart: $29.00 per 100
1000 pieces, 10 units in cart: $27.00 per 100
2000 pieces, 20 units in cart: $25.00 per 100
2500 pieces, 25 units in cart: $23.00 per 100
Learn More -
Hornady 45100 XTP Bullets 45 Caliber (451 Diameter) 185 Grain Jacketed Hollow Point Box of 100$56.99 As low as $38.00
Hornady XTP bullets were designed for hunting, self-defense, and law enforcement. One of the great things about the XTP bullet is reliable performance, it features controlled expansion where six serrations divide the bullet into six symmetrical sections. These sections weaken the jacket to allow controlled expansion at low velocities and ensures fragmentation does not occur at high velocities. Each XTP Bullet has a swaged core and drawn copper jacket to ensure uniform expansion and in-flight stability. Adding a cannelure to this bullet keeps the core and the jacket locked together while also allowing the cartridge case to tightly crimp, adding security at high velocities. This is not loaded ammunition.
Quantity Discount As Follows:
Prices include shipping!
300 piece, 3 units in cart: $44.00 per 100
500 pieces, 5 units in cart: $42.00 per 100
1000 pieces, 10 units in cart: $40.00 per 100
2500 pieces, 25 units in cart: $38.00 per 100
-
30 Carbine Reloadable Brass **Free Tumble Cleaning**(250 Count)$66.99
Polished 30 Carbine range brass, in stock and ready to ship now! After this material passes through our multi layered sorting process it must then be hand sorted for several reasons. Nearly every lot of 30 carbine brass has berdan(2 hole) primed cases and 327 Federal cases mixed in. Before shipping our employees look inside every case by hand with a pen light to ensure you only get reloadable boxer primed cases, no berdan cases in your order. 327 Federal is another problem with 30 Carbine brass, 327 is very similar in diameter and length but is a rimmed cartridge. Our employees will inspect every head stamp by eye/hand to make sure no 327 ends up in your order either. After this extensive sorting process, the yield of any load of 30 carbine are dramatically reduced, sometimes by as much as 35%! Until now we always kept 30 Carbine for our gunshow or local customers. We were able to produce enough to make a product on the website so here it is!
IF THERE IS NO ADD TO CART BUTTON, THIS PRODUCT IS OUT OF STOCK. PLEASE CLICK THE LINK BELOW TO SEE OUR PROCESSED READY TO LOAD 30 CARBINE!
LINK TO PROCESSED 30 CARBINE BRASS
Learn More -
40 SW/10MM 180 Grain Full Metal Jacket Flat Point CP(250 count)$65.99 As low as $52.00
American made 40 caliber .400 diameter full metal jacket flat point bullets weighting in at 180 grains, perfect for any of your 10MM or 40 smith and wesson loads. These projectiles feature a lead core with a precision drawn copper jacket, rugged, and capable of +P velocities in 40SW or the higher pressure 10MM. These bullets are incredibly uniform in weight and diameter and are priced right. Do not be fooled by inferior foreign made bullets commonly peddled online, they cannot be compared to an American made bullet.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $110.00 or $55.00 per 250 pieces.
2000 pieces, 8 units: $416.00 or $208.00 per K, $52.00 per 250
Learn More -
300 Blackout .308 150 Grain Spire Point(100 ct.)$29.99 As low as $21.00
.308 150 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make supersonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $23.00 per 100
500 pieces, 5 units in cart: $21.00 per 100
Learn More -
300 Blackout .308 180 Grain Spire Point(100 ct.)$31.99 As low as $24.00
.308 180 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $26.00 per 100
500 pieces, 5 units in cart: $24.00 per 100
Learn More -
Northeast 300 Blackout .308 220 Grain Spire Point Subsonic(100 ct.)$35.99 As low as $27.00
.308 220 Grain spire point plated bullets manufactured in the USA. These bullets were designed to function especially well in 300 blackout but can also be used in any other lower pressure loads calling for a .308 projectile. These are the proper weight to make subsonic 300 blackout. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $29.00 per 100
500 pieces, 5 units in cart: $27.00 per 100
Learn More -
30 Carbine Deprimed Ready to Load Brass(250 ct.)$79.99 As low as $71.00
In stock and ready to ship now! 30 Carbine, all same SL stamp, deprimed, sized, and steel pin tumbled this material looks like jewelry. It began life as loaded 30 M1 carbine and was shot to test rifles at an indoor range owned by a large firearms manufacturer. The material was picked up and then sold to us as #1 brass and we decided it was the perfect material to process. We have steel pin tumbled, deprimed, and resized this material, it is as close to new brass as you can get! Purchase this material with absolute confidence in quality and cleanliness.
Quantity Discount As Follows:
2 units in cart, 500 count: $150.00, $75.00 per 250 ct.
4 units in cart, 1000 count: $292.00, $73.00 per 250 ct.
12 units in cart, 3000 count: $852.00, $284.00 per k($71.00/250 ct.)
Learn More -
45-70 Government HORNADY STAMP ONLY Fired Brass(50 Count)$54.99
All Indoor shot and stored Hornady Stamp only 45-70 Government brass. This material has been mechanically sorted three times and hand sorted twice. We have polished the material so it is ready for for you to begin processing immediately.
We sort this stamp out since hornady cuts its brass shorter to accomodate their longer ogive FTX Flex tip bullet. According to Hornady volume 10, 2.04" is the required trim length for their brass to accomodate the Hornady 250 grain monoflex and the 325 grain FTX projectile due to longer Ogive.
THIS BRASS IS SHORTER THAN REGULAR 45-70, YOU MUST BE CERTAIN YOU CAN LOAD IT PRIOR TO PURCHASING IT, YOU MUST DO YOUR RESEARCH.
Learn More -
Northeast 40SW/10MM 165 Grain Flat Point(250 count)$42.99 As low as $32.00
40 Caliber .401 165 grain flat point plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $72.00, $36.00/250
1000 pieces, 4 units: $136.00, $34.00/250
2500 pieces, 10 units: $320.00, $128.00 per K, $32.00/250
-
Northeast 40SW/10MM 180 Grain Flat Point(250 count)$45.99 As low as $35.00
40 Caliber .401 180 grain plated bullets manufactured in the USA. These bullets are perfect for 10MM or 40 Smith and wesson loadings. Two things make these bullets superior to others, a hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity discount as follows:
Prices include shipping
500 pieces, 2 units: $78.00, $39.00/250
1000 pieces, 4 units: $148.00, $37.00/250
2500 pieces, 10 units: $350.00, $140.00 per K, $35.00/250
-
Hornady .458 300 Grain Hollow Point 4500(100 count)$51.99 As low as $42.00
.458 diameter hollow points manufactured by Hornady, perfect for 45-70 Government, 458 Socom, or any other load calling for a .458 diameter projectile. These bullets feature a precision drawn copper jacket and traditional serated cannelure for a strong crimping foundation to hold these bullets in place once loaded. These will make wonderful self defense, hunting, or paper punching bullet!
We acquired a decent sized lot of these bullets on a buyout from a company that went out of business, this is very competitive pricing on this item. Once we are out of them, that is it, there is no more to be had at these prices.
Quantity Discount as Follows:
300 pieces, 3 units in cart: $46.00 per 100 pieces
500 pieces, 5 units in cart: $44.00 per 100 pieces
1000 pieces, 10 units in cart: $42.00 per 100 pieces
-
Hornady .223/5.56 55 Grain Full Metal Jacket Boat Tail(250 Count)$41.99 As low as $27.00
.224 diameter, 55 grain Full Metal Jacket boat tail bullets with a serrated cannelure manufactured in the USA by Hornady. These projectiles feature a copper drawn jacket and an all lead core in a boat tail profile. These will make exceptional 5.56 Nato or .223 Remington loads.
Quantity Discount as follows:
500 pieces, 2 units in cart: $68.00, $34.00/250
1000 pieces, 4 units in cart: $128.00, $32.00/250
2500 pieces, 10 units in cart: $290.00, $116.00 per K, $29.00/250
8000 pieces, 32 units in cart: $864.00, $108.00 per K, $27.00/250