Search results for: '358 250 gr'
- Did you mean
- 308 250 gr
- 357 250 gr
- Related search terms
- 358 brass'nvOpzp; AND 1=1 OR (<'">iKO)),
- 250 reloading bullets both tool
- 250 bullet brass
- 2500+5.56+from+brass+500+coat+for+tumble+cleaning
- 358 legend free brass all winchester seat 100 count
-
30 Carbine Reloadable Brass **Free Tumble Cleaning**(250 Count)$66.99
Polished 30 Carbine range brass, in stock and ready to ship now! After this material passes through our multi layered sorting process it must then be hand sorted for several reasons. Nearly every lot of 30 carbine brass has berdan(2 hole) primed cases and 327 Federal cases mixed in. Before shipping our employees look inside every case by hand with a pen light to ensure you only get reloadable boxer primed cases, no berdan cases in your order. 327 Federal is another problem with 30 Carbine brass, 327 is very similar in diameter and length but is a rimmed cartridge. Our employees will inspect every head stamp by eye/hand to make sure no 327 ends up in your order either. After this extensive sorting process, the yield of any load of 30 carbine are dramatically reduced, sometimes by as much as 35%! Until now we always kept 30 Carbine for our gunshow or local customers. We were able to produce enough to make a product on the website so here it is!
IF THERE IS NO ADD TO CART BUTTON, THIS PRODUCT IS OUT OF STOCK. PLEASE CLICK THE LINK BELOW TO SEE OUR PROCESSED READY TO LOAD 30 CARBINE!
LINK TO PROCESSED 30 CARBINE BRASS
Learn More -
40 S&W 165 Grain Accu Coat Round Nose Flat Point(250 ct.)$37.99 As low as $28.00
40 S&W 165 round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $64.00, $32.00/250
4 Units, 1000 pieces: $120.00, $30.00/250
8 Units, 2000 pieces: $224.00, $112.00/K, $28.00/250
-
40 S&W 200 Grain Accu Coat Round Nose Flat Point(250 ct.)$39.99 As low as $30.00
40 S&W 200 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. Anyone looking to make low recoil subsonic 40 smith and wesson ammo for fast follow up shots will do well with these. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
Quantity Discounts are as Follows
Prices include shipping!!
2 Units, 500 pieces: $68.00, $34.00/250
4 Units, 1000 pieces: $128.00, $32.00/250
8 Units, 2000 pieces: $240.00, $120.00/K, $30.00/250
-
32 Caliber 100 Grain Accu Coat Round Nose Flat Point(250 ct.)$32.99 As low as $27.00
32 caliber .313 diameter, 100 grain round nose flat point coated bullets now available at Northeast! These bullets start life as ingots consisting of 92% lead, 6% antimony, and 2% tin, the optimal lead composition for the making of projectiles. The coating is a polymer based material that has been tested extensively for optimal performance. The coating material reduces friction and wear on your barrel and will not smoke. Unlike traditional lead cast bullets, these will not leave any leading in the barrel. This is critical in maintaining consistent barrel condition so your last shot will land where your first did as long as you do your job as a shooter. These projectiles are twice sized, once prior to coating and then a second time after coating to ensure consistent diameter. The price point on these bullets is such that even the most cost conscious shooters can justify using them. Coated bullets provide many of the benefits of a plated or fmj bullet while remaining closer in price to a lead cast bullet.
For Quantity Discount, put two units in your cart(500 ct.) and pay just $54.00 delivered!
Learn More -
357 Magnum Nickel Plated Brass(250 count) FREE TUMBLE CLEANING!$54.99
All indoor shot and stored 357 magnum nickel plated fired brass, tumble cleaned and fully sorted to remove any yellow brass. As we have mentioned on other product pages regarding our brass, this material is 3 times sorted mechanically and 2 times sorted by hand to remove any damages, lives, or foreign calibers. The key component to our sorting process when dealing with either 38 special or 357 magnum is having a machine in house that sorts by height. The accuracy of our 357 magnum sort is exceptional due to the fact that we are able to sort not only by case diameter but also by height. We are tumble cleaning this material to a nice shine and as with all of our brass we are adding 2% to the overall wieght of the order to ensure you get your money's worth. The headstamps in this brass include but are not limited to Remington, Federal, Speer, and Winchester. You can purchase this brass with absolute confidence in overall quality, accuracy of sort, and cleanliness.
As with our 45-70 Government brass, we remove the Hornady headstamps. Hornady stamps in Nickel 357 magnum are usually loaded with their FTX bullet, to accomodate the longer bullet, Hornady nickel brass is much shorter than the usual 357 magnum. Most people are not setup to load this short brass so we now remove it. We are stock piling this hornady 357 magnum brass, if you are able to load it and would like to purchase it, just email us. See the email address on the top of this page in the blue margin.
-
Hornady 22 Caliber .224 40 Grain V-Max 22241(250 ct.)$47.99 As low as $38.00
22 caliber .224 diameter 40 Grain polymer tipped V-Max bullets from Hornady. We specifically brought these in at the request of a number of customers that are loading 5.7 X 28 though these can be used in a wide array of other cartridges. Hornady's V-Max Bullets feature a polymer tip which enhances accuracy and promotes devastating expansion. The tip raises the ballistic coefficient for faster velocity and also acts as a wedge, initiating bullet expansion. The boat tail creates in-flight stability for long-range shooting. Hornady's swaging process creates precise formation of the core around the tip of the bullet, creating a build-up of energy which contributes to its phenomenal performance. The copper jacket provides the necessary bearing surface for maximum stability out of the barrel, and the jacket is built to withstand the fast twist rates of the most advanced varmint rifles. This is not loaded ammunition.
Quantity discount as follows:
Prices include shipping!
500 count, 2 units in cart: $88.00
1000 count, 4 units in cart: $168.00
2500 count, 10 units in cart: $160.00 per 1000
8000 count, 32 units in cart: $152.00 per 1000
-
44 Caliber .429 240 Grain Flat Point(100 ct.)$25.99 As low as $17.00
44 Caliber .429 240 grain round nose flat point plated bullets manufactured in the USA. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $19.00 per 100
500 pieces, 5 units in cart: $17.00 per 100
-
Hornady 270 Winchester 2 Die Set 546300$55.99
New Dimension I Two-Die Rifle Set 270 Winchester 546300 is an advanced two-die set for bottleneck rifles that incorporates several key design elements that make them function and easy to use. Hornady patented the "hornady unique" bullet seating system that performs benchrest level accuracy and precision. Full-length size dies feature a "zip spindle" design - a spindle and spindle collet are cut with light threads that eliminate slippage and allow incremental adjustments. The spindle has wrench flats where the locking screw would normally contact the threads, eliminating damage from pliers. Smaller pin size dies feature a "keyslot" threading on the spindle and spindle collet that allows for a "keyslot" of extra crimping. Yet they all feature a "nose bleed" chamber that is designed to eliminate case stretch during firing. Hornady Two Die Sets incorporate the patented "hornady seater" design that ensures smooth easy functioning and eliminates case damage from firing pin shears. The design features an "egg cuff" cut on the spindle where the tang and the seating stem mate. There is a "sure grip" where the sleeve and the seating stem meet. This virtually eliminates any variation in seating depth with a "sure grip" on the spindle and spindle collet.
Learn More -
.243 Nickel Fired Brass(100 ct.) **Free Tumble Cleaning**$64.99
Excellent quality Nickel .243 Winchester brass, all indoor shot and stored, polished and ready to ship now! This material came from a large firearms manufacturer's test range. This brass has been sorted mechanically three times and by hand twice. We also add an additional 2% to the overall weight of the material to ensure you get your money's worth. Purchase this brass with absolute confidence in cleanliness and accuracy of sort.
-
.243 Winchester Fired Brass(100 count)$49.99
Excellent quality .243 Winchester brass, all indoor shot and stored, polished and ready to ship now! This material is in great shape, headstamps include but are not limited too Remington, Federal, Hornady, and Winchester. This brass has been sorted mechanically three times and by hand twice. The final handsort prior to shipping is the most important sort as we make sure no cases with blown out primers or foreign calibers got by. We also add an additional 2% to the overall weight of the material to ensure you get your money's worth. Purchase this brass with absolute confidence in cleanliness and accuracy of sort.
-
45-70 Government HORNADY STAMP ONLY Fired Brass(50 Count)$54.99
All Indoor shot and stored Hornady Stamp only 45-70 Government brass. This material has been mechanically sorted three times and hand sorted twice. We have polished the material so it is ready for for you to begin processing immediately.
We sort this stamp out since hornady cuts its brass shorter to accomodate their longer ogive FTX Flex tip bullet. According to Hornady volume 10, 2.04" is the required trim length for their brass to accomodate the Hornady 250 grain monoflex and the 325 grain FTX projectile due to longer Ogive.
THIS BRASS IS SHORTER THAN REGULAR 45-70, YOU MUST BE CERTAIN YOU CAN LOAD IT PRIOR TO PURCHASING IT, YOU MUST DO YOUR RESEARCH.
Learn More -
44 Caliber .429 220 Grain Flat Point(100 ct.)$24.99 As low as $16.00
44 Caliber .429 220 grain round nose flat point plated bullets manufactured in the USA. We brought these bullets in after a number of calls for a lighter 44 caliber bullet that would run well in 44 magnum but also 44 special. Two things make these bullets superior to others, the hard lead core and thick plating. These bullets are made with a very hard lead core and are plated thicker than most of the commonly available plated bullets. The plating on these bullets is 7/1000-8/1000 of an inch and that comes standard on all of Northeast plated bullets. Other companies commonly sell the thicker plated bullets as a separate product for more money. Thick plating and a harder lead core is the standard on all of our bullets. These projectiles are totally enclosed in 100% pure copper plating to cut down on airborne lead, reduce fouling, and cost much less than jacketed projectiles. Each bullet is swaged to size and weight, plated, and then resized a 2nd time to ensure consistent diameter. We have tried many different brands of plated bullets and these are hands down the best we have seen.
Quantity Discount as Follows
Prices include shipping!
300 pieces, 3 units in cart: $18.00 per 100
500 pieces, 5 units in cart: $16.00 per 100